Warmth

Compact and fits easily in a pocket or backpack.

Compact design

This simple, fleece, neck warmer is designed to protect your neck from the cold this winter.

Maximum washing temperature 30°C. Normal cycle.

Condition

Skill Level

Weather Conditions

Reversible

Style

Main Material

This Firstheat model is also available in a hat version.

Outfit

Ski Neck Warmers & Balaclavas

Component encourages wicking and minimal drying.

Moisture management

Developed for low intensity (low perspiration) skiers who are looking for a warm base layer in cold weather.

Maximum wash temperature of 30°C. Very delicate cycle.

Intensity

Frequency

Collar Type

sleeve length

Place of Practice

Waterproof

anti-uv

Pocket

The BL 100 Base Layer Top has a regular cut.
It is a classic straight cut that adapts to a wide variety of body shapes.

How does the BL 100 Base Layer Top fit?

Polyester is the most-used fibre for base garments because it is relatively inexpensive, offers excellent performance, and can be knit to obtain a very lightweight and durable fabric. It actively absorbs moisture but does not dry particularly well when wet.


What are the benefits of polyester?

You only need three technical layers to stay warm on the slopes: Layer 1 or a base layer, to stay dry. Layer 2 or an insulating layer, to keep heat in. Layer 3 or a protective layer, to protect against bad weather.

How to dress to stay warm on the slopes

This product is repairable.We commit to repairing your product free of charge for the duration of the warranty. If you need the seams, zippers, or another element repaired, contact your store. However, if we can’t repair your product (production defect), we will exchange it or reimburse you.

This product is repairable.

The model wears size M and is 175 cm (5’9”) tall.
Measurements:
Waist size: 67 cm (26”)
Hip measurement: 99 cm (39”)
Chest size: 90 cm (35”)

To help you choose the right size

Ski Base Layers

Low: component provides moisture wicking with minimal drying.

Average: brushed lining for warmth. 180 g/m²

Designed for low intensity (low perspiration) skiers seeking a comfortable and warm undergarment.

Number of Pockets

belt height

Type of Length

The BL 100 Ski Base Layer Bottoms have a regular cut.
This is a classic, straight cut. Suitable for all body shapes.

How do the BL 100 Ski Base Layer Bottoms fit?

We commit to repairing your product free of charge for the duration of the warranty. If you need the seams, zippers, or another element repaired, contact your store. However, if we can’t repair your product (production defect), we will exchange it or reimburse you.

Ski Leggings & Tights

60 g/sqm wadding, brushed polyester lining, comfort temperature down to - 4°C.

5,000 mm membrane (Schmerber) and partially taped seams.

Semi-elastic waist, belt loops, strap loops.

Adjustable

Water-repellent exterior fabric does not get waterlogged.

Water repellent

Pockets

Elastic gaiters in the lining keep snow out.

Limits snow entering

Ready to have a go on the slopes? These warm and comfortable waterproof pants will protect you from bad weather. The gaiters go over your boots.

Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.

type of lining

Season

reinforced area

Type of Brushing Boots

modular

Windproof

RECCO system

type of waterproofing

Type of Bell

Schmerber

With Straps

If you’re looking for better support on the shoulders, you’ll find loops for adding straps inside the waistband. The straps can be found on our website.

Straps

For warmth, we used insulating fill (60 m²g/m²). This synthetic, polyester-based lining traps air according to the size of the fibres to keep you warm.

Which fabrics are used to make my pants warm?

We lab test our products to provide you with a comfort indicator. The comfort indicator is measured without tights for pants, and with a thermal T-shirt and a fleece for jackets. The temperature indicated is the external temperature at which the testers were neither warm nor cold. Of course, the perceived temperature varies depending on the intensity of the activity and each individual’s metabolism.

How is comfort temperature measured?

The regular fit allows the pants to be combined with a technical base layer.

What is the fit of the 100 Ski Pants?

The resistance of a fabric is measured by the height of a water column in mm. The higher the pressure, the more waterproof the fabric. Fabric with a waterproof rating of 5,000 mm is resistant to the pressure exerted by a 5,000 mm column of water.
For skiing, we recommend fabrics rated 5,000 to 20,000 mm. At Decathlon, we lab test all of our waterproof products. This product's rating is?/ 5 In a shower test.

How is your pants’ water resistance measured?

These pants have elastic gaiters at the ankles to cover your boots. The seal created by the gaiters keeps the snow out.

How can I prevent snow from getting in my pants?

To optimize your product’s performance and durability: 
*Machine wash at 30°C on a synthetics cycle. 
*Turn the product inside out.
*Use a small amount of detergent. Do not use fabric softener.
*Wring by hand. 
*Dry on a hanger in a warm, well-ventilated place.
Do not dry clean. Do not place on a radiator.

How should I wash my pants?

The model in the photo is wearing a size L and measures 185 cm (6’1”).
Waist size:84 cm (33”)
Inside leg length: 86 cm (34”
Hip: 101 cm (40”)

Ski Pants & Bibs

Lightweight and compressible. Fits easily inside a pocket or backpack.

This fleece neck-warmer is designed to keep your kids warm this winter.

reflective

Tightening Type

Kids' Ski Clothing

Polyester knit for breathability and drying.

Breathability

Regular cut and stretch fabric for freedom of movement.

Freedom of movement

Very soft, warm and comfortable base layer. So pleasant you’ll forget you’re wearing it.

You need three technical layers to keep warm on the slopes:
- Layer 1 or second skin, to stay dry.
- Layer 2 or insulating layer, to keep the heat in. 
- Layer 3 to protect against the elements.

Very soft, warm and comfortable ski tights. So pleasant you’ll forget you’re wearing them.

This ski base layer was developed for kids. It will keep them warm on the slopes.

The BL 100 Base Layer Bottoms have a regular fit.
The classic straight cut adapts to a wide variety of body shapes.

How do the BL 100 Base Layer Bottoms fit?

We commit to repairing your product free of charge for the duration of the warranty. If you need seams, zippers, or another element repaired, contact your store. 
However, if we can’t repair your product due to a production defect, we will exchange it or reimburse you.

This product is repairable

This compact hat fits easily in a pocket or backpack.

This neck warmer can be adjusted with the drawstring.

This adjustable neck warmer is designed for anyone who wants to keep their neck nice and warm!

The drawstring allows you to tighten the neck warmer. It can also be adjusted into a hat.

Modular

Good: brushed polyester component. 210 g/m².

Delivering performance and functionality, this base layer maintains your warmth and comfort as you zip down the hill. Ideal for moderate-level activities.

The BL 500 ski base layer has a standard straight cut that adapts to all body shapes. It’s not too loose, so it keeps in the heat effectively.

Polyester is a commonly used fibre in base garments, because it’s relatively inexpensive and offers excellent performance in many ways, and especially because the fibres can be knitted to obtain an extremely lightweight fabric. It actively absorbs moisture but does not dry particularly well when wet.

Benefits of polyester

During the warranty period, solutions may be offered to you in-store. However, if we can’t repair your product (production defect), we will exchange it or reimburse you.

The model is wearing size M and is 1.73 m (5’8”) tall
Their measurements are as follows:
- Chest: 85 cm (33.5 in)
- Arm: 57 cm (22.4 in) (from shoulder to wrist)
- Waist: 67 cm (26.4 in)
- Inside leg: 83 cm (32.7 in)
- Hip: 99 cm (39 in)

clearance

Waterproof membrane, water-repellent outer fabric.

Durability

Elastic tightening system at the wrist. Wide cuffs.

These mittens were designed for young occasional skiers. They will keep their hands warm in any weather conditions.

abrasion 

Reinforced Palm

To Bring Warmth

leash

All Wedze gloves and mittens have a water-repellent treatment that makes water slide across the fabric’s surface instead of being absorbed. This means the fabric does not become saturated. It remains light and warm. A treatment applied to the outer surface makes the fabric water repellent. To remain effective, this treatment must be renewed every 2 to 3 washes with specific products that are available in our stores.

Water repellency of the component

The mitten’s waterproof membrane consists of a very thin polymer film placed between the lining and the part of the glove in contact with the environment. This membrane acts as a barrier to make the product waterproof. The product’s exterior materials are also treated for water repellency. Only a rubber-type glove is watertight. Under extremely wet conditions, a glove with a membrane will have limited waterproofness.

Waterproof membrane

All Wedze gloves and mittens are windproof. Did you know that the wind makes you feel colder? At an outside temperature of 0°C and a wind speed of 20 km/h, the temperature will feel like -10°C. Windproof fabrics limit wind chill and cold caused by the speed of the sport.

Windproofing

Simply pull the wrist strap with the opposite hand.

Easy to put on

An elastic drawstring that goes around the wrist can be used to remove the gloves on ski lifts without losing them.

Loss prevention system

Kids Ski Gloves & Mittens

Soft fleece balaclava for warmth and comfort.

Need protection for your head? This balaclava is designed just for you!

Water-Repellent

Wearing a balaclava is also more hygienic if you rent or borrow a helmet.

Hygiene

Cut short in back to make it comfortable to wear with a ski jacket. This prevents added layers that can limit freedom of movement while skiing.

Cut of the balaclava

Brushed component for extra warmth. Raised collar with snaps. Longline cut.

Cuffs that can be folded or unfolded for 2 years of use.

Knit with extremely soft thread for extra comfort and softness.

Softness

3 snaps at the shoulder open the collar to get your child’s head through.

Easy dressing

Natural stretch for better comfort and freedom of movement.

Slightly breathable base layer. Low perspiration wicking.

This base layer (or first layer) is designed to make your baby feel comfortable during their outings in the snow.

Adjustable Length

Grammage

Type of Layer

top length

Fastener Type

To stay warm and dry, we recommend the 3-layer technique: 
Layer 1 or a thermal base layer, to stay dry. 
Layer 2 or an insulating layer, to keep the heat in.

Layer 3: to protect against the elements.

How to dress your kids so they stay warm in the snow.

The durable, high-quality component has been tested in a lab and in the field to provide warmth and remain lightweight. The brushed knit provides the volume needed to create a layer of air that keeps your child warm.

The Base Layer Top has a regular cut.
This is a classic straight cut in a stretch knit fabric that fits the body shape of every child. The high collar protects the neck.

What is the cut of the Base Layer Top?

Designed for low intensity skiers who are looking for a warm base layer in cold weather.

We commit to repairing your product free of charge for the duration of the warranty. This service is offered in stores, including for snags, seams, zippers, and more.
However, if we can’t repair your product (production defect), we will exchange it or reimburse you.

Back and hand: 200 g/m² insulation, palm: 80 g/m², synthetic fur lining. Cuffs.

Waterproof membrane and water-repellent outer fabric.

Covered fingertips for better durability.

Abrasion resistance

Keep your hands warm with these ski gloves. Equipped with a cuff to prevent snow and air from entering, they leave the cold at the door. 

Glove Type

Stitching Type

All our gloves and mittens have a water-repellent treatment that means their fabric does not absorb water, but instead ensures it slides across the surface. As a result, the fabric does not become saturated with water. It remains light and warm. A fabric becomes water-repellent thanks to a treatment applied to its outer surface. To remain effective, this treatment must be reapplied every 2 to 3 washes with specific products that are available in our stores.

These ski gloves have a water-resistant membrane (a very thin polymer film) between the lining and the outer part of the glove. This membrane acts as a barrier to water and makes the product waterproof. In addition, the outer materials of the product benefit from a water-repellent treatment that reduces water absorption. Only a rubber glove is watertight. A glove with a membrane, under extremely damp conditions, will have limited waterproofness.

All our gloves and mittens are windproof. Did you know that the wind makes you feel colder? At an outside temperature of 0°C and a wind speed of 20 km/h, the temperature will feel like -10°C. Windproof fabrics limit wind chill and cold.

A special cuff has been built inside the 500 gloves. This soft and comfortable cuff keeps out draughts and snow from getting into the glove when it’s windy or in case of a fall. Extra warmth.

Airtightness

Simply pull the wrist-strap with the opposite hand for speedy and effective adjustment.

An elastic drawstring goes around your wrist so you can remove the gloves on ski lifts without losing them.

Snowboard Gloves & Mittens

10,000 Schmerber membrane and taped main seams.

Adjustable cuffs and snow skirt keep snow out.

4 pockets: 2 zippered hand pockets, 1 ski pass pocket, 1 inside pocket.

This jacket is designed for all skiers who are looking for protection against the elements and are concerned about their environment.

Snow Skirt

Ventilation Zippers

Membrane Construction

type of hood

thumb pass

Hood

Zipper Type

The model in the photo is wearing a size M and measures 185 cm (6’0”).  
Measurements: 
Chest measurement: 104 cm  (41”) Waist measurement: 104 cm (41”)  Arm length: 45 cm (18”)
Inside leg length: 80 cm (31.5”)

Textile dyeing requires a lot of water and also produces waste water from the dye baths. To reduce this environmental impact, the bulk dyeing process we use involves adding pigments to the yarn during its production.

For more information on sustainable development: Dope-dyeing

The cut of a textile garment inevitably produces waste as different pieces do not always fit together. 
With this product, we used a minimal waste design method, which consists of piecing together the parts like a jigsaw puzzle to waste as little material as possible. We are now proud to offer our first jacket resulting from this method, with a 36% gain.

For more information on sustainable development: Waste reduction

Regular fit. The jacket’s sides are straight rather than fitted. This jacket is roomy enough to be worn over a first and second technical layer.

What is the fit of the 100 Ski Jacket?

A fabric’s water resistance is measured by the height of a water column in mm it can support (test based on the ISO 811 standard). The higher the pressure, the more waterproof the fabric. Fabric with a waterproof rating of 5,000 mm is resistant to the pressure exerted by a 5,000 mm column of water.
For skiing, we advise components rated between 3,000 mm and 20,000 mm. 

How is waterproofing of the fabric measured?

The 100 Ski Jacket was rigorously developed to keep moisture out and prevent wind chill so you can brave bad weather. We tested this product’s waterproofness in use over several days in various weather conditions. Using this test, we can confirm that the jacket protects you from snowfall or a light rain shower of 12 cm in 2 hours.

How is the water resistance of a jacket measured?

We lab test each of our products to provide you with a comfort indicator. This comfort indicator is measured without tights for pants, and with a thermal T-shirt and a fleece for jackets. The temperature indicated is the external temperature at which the testers were neither warm nor cold. Of course, the perceived temperature varies in line with the intensity of the activity and the metabolism of the individual.

To stay warm and dry, use the 3-layer rule:- Layer 1, a base layer to keep you dry. - Layer 2, an insulating layer to keep you warm. - Layer 3, a protective layer against the elements.

wedze

Feet Warmers x10