140 g/m2 fleece. Thermal comfort between 0°C and 5°C.

Warmth

Polyester knit allows moisture to evaporate.

Breathability

The fleece material allows these gloves to dry quickly outdoors.

Quick drying

Keep your children’s hands warm: the insulation provides comfort at temperatures between 0°C and 5°C, with 140 g/m² fleece.

Maximum washing temperature 30°C. Normal cycle.

Waterproof

Options

Condition

Windproof

Frequency

reinforced area

Tightening Type

Main Material

The fleece traps air to insulate. These gloves keep children’s hands warm on chilly days. Thermal comfort between 0°C and 5°C

Why wear fleece gloves?

The thermal resistance test measures the loss of heat between the body and the outside, indicating the insulating properties of the product. It’s carried out on a thermal hand via sensors that measure body heat.

How is thermal comfort measured?

These polyester knit gloves combine warmth and breathability. Designed to allow water vapour to wick away, they keep your hands dry, even during intense activities.

Why are these gloves breathable?

The other advantage of fleece material is that it dries quickly. Ideal for all your child’s adventures.

Will these gloves dry quickly?

This pair of fleece gloves weighs only 20 g (0.7 oz) at size 10 years. They can easily be stored in a bag or pockets.

Are these gloves lightweight?

Winter Hiking Gear

Comfort temperature:  -6°C
Limit temperature: -16°C.

Breathable and waterproof to keep your feet dry.

Tread with Snow Contact technology: sole materials and tread pattern for snow.

Grip

Easy dressing

The location and depth of the 3.5 mm (0.14”) lugs provide traction on snow.

Traction

Designed so your kids can enjoy the snow! Simple and effective for snowy outings.

type of lining

Removable Sole

Season

comfort temperature

Place of Practice

Outsole Technology

Boots Type

Lining Material

Foot Width

Boot Height

Fastener Type

We perform comparative studies in a thermal laboratory in walking conditions with light winds (5 km/h or 3 mph). This is how we measure the thermal resistance of our boots. Everyone feels the cold differently.Comfort temperature: Felt slightly cold and 70% of users experienced thermal comfort in the boots.
Limit temperature: Felt extremely cold and 10% of users found experienced thermal comfort in the boots.

Are these boots warm enough for winter hikes?

These boots have a membrane to guarantee waterproofing and breathability. A membrane is a very fine component (5 to 25 micrometres) on the inside of a fabric that prevents water from entering, but allows moisture to escape.

How do these boots protect from outdoor conditions?

We made sure that your boots are waterproof by conducting lab tests to simulate walking with the boots half-submerged in water. We also conducted field tests to measure wear and aging. 

Are my boots 100% waterproof?

This product was lab-tested by our engineers to ensure your total satisfaction. We tested the following elements: tear resistance of eyelets and straps, bonding, toxicology, abrasion resistance of outsole and upper components, and accelerated aging.

Will my boots withstand regular use over the long term?

Follow these principles for your winter activities. 
Warmth: wear warm socks (ideally with a good percentage of wool).
 Breathability: choose socks based on the intensity of the hike and, to minimize moisture, make sure they’re breathable.
Boot height: the height of the sock should correspond to the height of the boot—for more protection, choose higher socks.

How do I choose the right footwear for hiking in the snow?

Water repellency is a fabric’s capacity to make water run off its surface without being absorbed. It prevents the fabric from soaking up water, keeping it lightweight, warm, and breathable. Water repellency is achieved by treating the fabric’s exterior. This treatment needs to be reapplied throughout the product’s lifetime. Products for this purpose (spray or liquid) are available in our stores.

How to preserve the technical qualities of the boots

Boots can get wet from condensation and perspiration.
If your boots are very wet, remove the insole, fill the upper with balls of newspaper, and change the newspaper regularly. The paper will absorb the moisture and dry them faster.
Never put the boots too close to a heat source. Leave them in a warm, dry, and ventilated place.

How to dry the inside of your boots

Toddler & Kids Hiking Shoes

Windproof and brushed fabric on the inside.
Comfort temperature: 2.5°C.

Water-repellent material: water runs off without being absorbed.

Water repellent

Lower leg and silicone on the inside keep snow out.

Limits snow entering

Stability

Windproof fabric keeps air out to reduce heat loss.

Zipper fasteners with a silicone pull for easier grip.

Ease of use

Write your name on the label inside the collar.

Customization

These softshell pants were designed for kids hiking in cool and cold weather. 

Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.

Ventilation Zippers

Number of Pockets

belt height

Type of Brushing Boots

Sportsperson’s Height

modular

Pocket

Type of Length

Type of Bell

The brushed fabric traps air for added insulation.
We carried out a comparative study in a thermal laboratory in walking conditions in light winds (5 km/h). 
The comfort temperature is the calculated air temperature where 70% of users have a slightly warm thermal sensation.
For these pants, it’s 2.5°C.
However, everyone feels the cold differently.

How do these pants keep my child warm?

In winter, it is important to protect from moisture (snow, rain) and wind, because they can significantly cool the body whether moving or at rest. The windproof, water-repellent outer fabric keeps kids in all winter conditions. Plus, the ankle tabs keep snow out.

How do these pants protect from outdoor conditions?

Water repellency is a fabric’s capacity to make water run off its surface without being absorbed. It prevents the fabric from soaking up water, keeping it lightweight, warm, and breathable. Water repellency is achieved by treating the fabric’s exterior. The garment should be retreated over its lifespan (recommended after each wash). Products for this purpose (spray or liquid) are available in our stores.

What is water repellency and how can you maintain it?

Whatever your cold-weather activity, use the three-layer technique:
Layer 1: A high-tech base layer to wick moisture away from the body and keep your skin dry.
 Layer 2: A fleece jacket or sweater to provide warmth and transfer moisture outward.
 Layer 3: A jacket to protect against the elements (rain, snow, and wind). 
To eliminate moisture, the whole outfit must be breathable.

How to dress properly for hiking in the snow

We conduct tests on the selected components: resistance to rubbing and abrasion, colourfastness, and resistance to repeated washing. All these tests were conducted on the pant material.

Will your pants withstand regular use long-term?

Kid's Hiking Pants

This dual-material neck warmer effectively protects from the cold.

Two fabrics mean it can be worn six different ways.

Flexibility

When worn over the nose, it provides effective moisture wicking.

Moisture management

This neck warmer is practical and easy to use. The dual materials mean kids can easily adapt the warmth around the neck.

Maximum wash temperature of 30°C. Very delicate cycle.

pattern

Skill Level

Weather Conditions

Reversible

Style

The Hug Neck Warmer packaging shows six different ways to wear it (hat, balaclava, neck warmer, etc.).

Kids' Ski Clothing

Comfort temperature: -14°C
Lower limit: -28°C

100% waterproof bottom cradle and water-repellent textile upper.

Drying time

Easy to put on with a wide opening and lacing system.

EVA midsole provides cushioning when hiking.

Cushioning

The position and depth of the 4 mm (0.16”) lugs provide traction in snow.

Designed to keep feets warm during everyday cold weather activities. Walks, playing in the snow, sledding—perfect for whatever winter throws at you.

We perform comparative studies carried out in a thermal laboratory, in walking conditions with light winds (5 km/h or 3 mph). This is how we measure the thermal resistance of our boots. However, every individual feels the cold differently.Comfort temperature: felt slightly cold and 70% of users find the thermal sensation acceptable on their feet.
Limit temperature: felt very cold and 10% of users considered the thermal sensation acceptable on their feet.

A 100% waterproof mid-height inner shoe protects the part of the foot most in contact with the snow. The textile upper is water-repellent and warm for effective protection against cold and snow.The seams that join the inner shoe and the upper are not waterproof.In very deep snow, water can get in through the seams over time, resulting in wet feet.

The material and tread of Snow Contact soles are specifically designed for optimal grip and traction. Snow Contact soles are more effective on snow than traditional soles. When walking on ice, adding anti-slip crampons to your boots is the only way to ensure optimum safety.

What are the advantages of Snow Contact technology?

To stay warm when hiking in the winter, we recommend the following: 
Warmth: wear warm socks (ideally with a good percentage of wool).
 Breathability: choose socks based on the intensity of the hike and, to minimize moisture, make sure they’re breathable.
Boot height: the height of the sock should correspond to the height of the boot—for more protection, choose higher socks.

This product was lab-tested by our engineers to ensure your total satisfaction.    

Water repellency is a fabric’s capacity to make water run off its surface without being absorbed. It prevents the fabric from soaking up water, keeping it lightweight, warm, and breathable. Water repellency is achieved by treating the fabric’s exterior. This treatment needs to be reapplied over the product’s lifetime. Products for this purpose (spray or liquid) are available in our stores.

Comfort temperature: -7.5°C.
Limit temperature: -18°C.

For children who play or hike regularly in packed or deep snow. Built for warmth and protection.Adjustable for better support.

We perform comparative studies carried out in a thermal laboratory, in walking conditions with light winds (5 km/h or 3 mph). This is how we measure the thermal resistance of our boots. However, every individual feels the cold differently.Comfort temperature: Felt slightly cold and 70% of users experienced thermal comfort in the boots.
Limit temperature: Felt extremely cold and 10% of users experienced thermal comfort in the boots.

A shoe’s traction depends on tread number and shape (3.5 mm/0.14” on this boot). The grip depends on the materials of the sole and the tread pattern, like car tires. Traction optimizes propulsion, prevents slipping when going uphill, and stabilizes the boot. 
Grip prevents the boot from slipping and skidding on smooth ground or in demanding conditions (rain, snow, and ice).

What is the difference between traction and grip?

clearance

Thin enough to fit easily in a pocket or backpack.

Compact design

Inner label for writing your child’s name.

This lightweight, stretch-knit hat is perfect for kids who want to stay warm in style!

reflective

Beanie Length

Type of Beanie

Water-Repellent

For the Wedze models, the kids’ size is for head sizes between 52 and 56 cm. Depending on the elasticity of the weave, this measurement can vary slightly. 
For a child whose head size is between 48 and 52 cm, choose a child's model first. Finally, for a child with a head size below 48 cm, choose a baby hat.

Child sizes

Double-sided microfleece. 200 g/m² density for optimal warmth. High collar.

Polyester knit: lets the body's moisture pass through (RET=6.3). 
Full zipper.

Lightweight

Pockets

Machine washable at 30°C, quick drying, and crease-resistant.

Ease of Maintenance 

A zippered fleece jacket that will become your child's best friend for staying warm on outdoor excursions. 

Collar Type

Hood

Zipper Type

A warm fleece is good, but a warm, stylish fleece is even better! This fashionable fleece has a colour block look your child will love. We also added 2 zippered pockets for kids to store small items safely. 

Your child will love this fleece 

Your kids need to stay warm during their outdoor activities. With this fleece, there's no need to worry. The fleece fabric traps air, creating an insulating barrier.

A fleece that parents will love

If their clothes are not breathable, kids can quickly get too hot when they’re playing. We selected a breathable fabric that wicks away moisture even at high activity levels so this fleece jacket remains comfortable.

A comfortable fleece for high-intensity exercise

The breathability of a fabric is measured by its evaporative resistance or RET (ISO 11092 standard): The lower it is, the more breathable the fabric. Examples: RET < 9 (very breathable), 9 < RET < 12 (breathable), RET > 20 (low breathability).
This fleece jacket has a RET of 6.3.

What is the RET index?

This fleece is available in the following sizes: 
- Age 7-8 
- Age 8-9 
- Age 10-11 
- Age 12-13 
- Age 14-15 

What sizes are available?

Wash the fleece at 30°C on a synthetics cycle to avoid damaging it. Wash it inside out with the pockets closed. To protect the fabric, do not exceed a 1,000 rpm spin speed. Do not tumble dry.

How should I care for this zippered fleece? 

Kids' hiking shirts

Comfort temperature: -5°C.
Limit temperature: -14°C.

Snow Contact technology: optimal grip and traction on snow.

The location and depth of the 3 mm (0.12”) lugs provide traction on snow.

These boots allow kids to make the most of winter at home, at school, and on icy paths.

Type of Shoes

Shoe Height

Playing Surface

We perform comparative studies carried out in a thermal laboratory, in walking conditions with light winds (5 km/h or 3 mph). This is how we measure the thermal resistance of our boots. Everyone feels the cold differently.
Comfort temperature: felt slightly cold and 70% of users find the thermal sensation acceptable on their feet.
Limit temperature: felt very cold and 10% of users consider the thermal sensation acceptable on their feet.

Will these boots be warm enough for your child’s winter hikes?

These boots have a membrane to guarantee waterproofing and breathability. A membrane is a very thin component applied to the inner surface of the fabric that prevents water from entering while allowing moisture to escape.

The material and tread of Snow Contact soles are specifically designed for optimal grip and traction. Snow Contact soles are more effective on snow than traditional soles. When walking on ice, adding crampons to your boots is the only way to ensure optimum safety.

Will my boots withstand regular use in the long term?

To stay warm when hiking in the winter, we recommend the following principles: 
Warmth: wear warm socks (ideally with a good percentage of wool).
 Breathability: choose socks based on the intensity of the hike and, to minimize moisture, make sure they’re breathable.
Boot height: the height of the sock should correspond to the height of the boot—for more protection, choose higher socks.

Boots can become heavy if you wear them in wet conditions (through condensation and perspiration).
If your boots are very wet, remove the insole and fill the upper with balls of newspaper, changing them regularly. The paper will absorb the moisture and dry them faster.
Never place your boots too close to a heat source. Leave them in a warm, dry, and ventilated place instead.

Polyamide fabric reinforcement reduces abrasion and increases heel stability.

Abrasion resistance

French terry knit under the foot for a more comfortable fit.

User comfort

Asymmetrical fit (left and right socks) for improved alignment.

Anatomic design

Knit stitch reduces blisters at the metatarsals and heel.

Reduced chafing

Designed for hiking in cold weather. These socks offer maximum comfort and warmth with the inside of the foot knit in merino wool.

height of the sock

thickness of the sock

reduced chafing

Type of Socks

shoes with left or right mark

Packaging

Wool fibres can store a lot of air and let water vapour escape, making wool an excellent choice for moisture management and thermal regulation. Wool’s ability to store and release moisture make it an insulating, comfortable material for hiking socks.

The properties of wool

The merino wool, from Spain, has been a carefully selected breed for generations because of its wool. It provides a softer fibre than traditional wool. After shearing, the wool is cleaned to remove impurities, then carded, spun, and finally used for knitting or weaving.

What is merino wool?

Merino wool offers an unbeatable experience: soft, lightweight, and breathable. Thanks to its fine fibres, it provides natural thermal regulation. It keeps your feet warm in cool weather and cool in warm weather.

What are the benefits of merino wool?

To stay warm when hiking in the winter, we recommend: 
Warmth: wear warm socks (ideally with a good percentage of wool). 
Breathability: choose socks based on the intensity of the hike and, to minimize moisture, make sure they’re breathable.
Boot height: the height of your socks should correspond to the height of the boot—for more protection, choose higher socks.

These socks come in packs of 2 pairs of matching socks.

Pack of 2 pairs

The stretchy fabric means these socks conform to your feet and stay firmly in place. Given that the length, width and volume of our feet is always different, we advise trying on your socks in store before purchase, and testing them before going on a long hike.

quechua

Kids’ Warm and Waterproof Winter Parka, NH 900 Age 7–15