Carrying comfort

1 main compartment with a double zipper | 1 deep outer compartment

Pockets

Vol: 10 L | Weight:145 g (5.1 oz) | Dim.: 39 x 21 x 12 cm (15.4 x 8.3 x 4.7”)

Capacity

Durable, abrasion-resistant components and assemblies | 10-year warranty

Abrasion resistance

Ventilation

Ease of use

Volume (L)

Height (cm)

Condition

Depth (in cm)

Frequency

Frame

Weight (g)

Number of Pockets

carrying comfort

adjustable height

water bladder included

Waterproof

rain cover

Foldable

Type of Bell

Width

Number of Compartments

Fastener Type

Main Material

Thanks to your feedback, we improved the design of the 10 litre Arpenaz NH 50 Hiking Backpack.
We added a double zipper on the main compartment and a larger pocket bottom on the outside pocket. The aim is to not lose your belongings when opening your bag. 
And of course, the price hasn’t increased!

Your opinion is important to us!

The volume of each backpack is measured using a standardized method: the main compartment and all the pockets are filled with little balls. These balls are then emptied into a graduated container to get the equivalent volume in litres.

How is volume measured?

Put heavy items at the bottom. Pack your clothes around these items. Keep your waterproof jacket and/or fleece in an easy-to-access location. Place small frequently used items in the pockets (sunscreen, map, glasses, etc.). 

How to pack your backpack

At Decathlon, all of our Quechua backpacks are guaranteed for 10 years against normal product wear and tear. In the case of a defect, we recommend its repair, replacement, or a refund. The guarantee covers the components from the zip to the seams: more information can be found on our website.

Quechua backpack: 10-year warranty

The following components were validated in the lab: fabric, buckles, straps, foam, and zippers. For example, we test the fabric’s resistance to abrasion and tearing, colourfastness, and waterproofing. We also check the resistance of the construction using a dummy that reproduces a hiker’s movements to replicate several years of wear and tear.

Tested for optimal durability

1 - Loosen all the straps (straps, belt, and load adjuster straps).
2 - Put the backpack on.
3 - Tighten the shoulder straps.
4 - Adjust the load adjuster straps as needed.

How to adjust your backpack

The water-repellent components allow you to continue walking or hiking in light rain for short periods. Note: This backpack is not watertight or waterproof and does not come with a rain cover. 
To keep your belongings dry on longer walks or hikes, we recommend the following product: 10 L to 20 L Hiking Backpack Rain Cover (reference 8772113), which can be found on our website.

Waterproofing

Kids' Backpacks

Waterproof coating 5,000 mm (Schmerber) | Taped seams

2 hand pockets | 2 hidden pockets (including 1 closing pocket) | 1 inside pocket

Easy transport

Folds into its inside mesh pocket | Loose fit for freedom of movement

Windproof

Hydrophilic coating RET = 12 | Ventilated area on the upper back

Breathability

Comes with a belt | Available from XS to 3XL

Anatomic design

Lightweight, compact jacket | Weight: 420 g (14.8 oz) in size M

Lightweight

This long, waterproof jacket is designed for occasional hikes in light rain on the flat terrain.

Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.

Maximum washing temperature 30°C. Normal cycle.

Ventilation Zippers

Precipitation

Weather Conditions

sleeve length

Pocket

type of waterproofing

breathability (in RET)

Type of Length

Hood

Style

Schmerber

The fabric is water-repellent: water beads off the surface. The fabric doesn’t soak up water and stays lightweight and breathable.
Water repellency is achieved by treating the fabric’s exterior. It doesn’t use fluoride compounds. 

PFC-free water repellency

The waterproofing of a fabric is measured in Schmerbers or mm of water (pressure of a water column). The higher this number, the more waterproof the fabric. 
This jacket is designed with a waterproof coating: this component resists 5,000 mm of water (Schmerbers) before washing (equivalent to the pressure exerted by a 5,000 mm column of water).

Component waterproofing

To maintain water repellency, we recommend regular reactivation. 
Reactivate water repellency after three washes (remember to rinse thoroughly) or after using a dozen times in the rain. 
You can easily reactivate water repellency by warming the fabric: 
- in a dryer for 15 minutes (synthetics cycle) - with a hair dryer, moving back and forth from a distance of 20 cm, twice
- with an iron on the delicate setting and with the steam function off

Preserving your jacket’s performance

The fabric of this jacket is breathable: RET = 12.
Component breathability is measured using thermal evaporative resistance (RET). 
RET refers to a fabric’s capacity to let perspiration evaporate. 
The lower the RET, the more breathable the fabric. 
RET ≤ 6: very breathable fabric
RET ≤ 12: breathable fabric
RET ≤ 20: little or no breathability

Fabric breathability

This jacket is designed for hiking for 2 hours at a maximum pace of 5 km/h, with no elevation gain.
During activity, how much you perspire depends on the intensity and duration of the effort.If the fabric’s breathability is not right for your type of activity, sweat condenses inside the jacket.You will feel damp,not because of rain soaking through the shell, but because of condensation caused by perspiration.Choose a waterproof jacket according to your level of physical activity.

Choose your waterproof jacket according to the intensity of your activity

Our priority: ensure our hiking clothes fit all body shapes! We want to help everyone enjoy hiking in complete comfort. This is why this jacket is available in sizes XS to 3XL.

Available in sizes XS to 3XL

Women's Hiking Jackets

onlyonline

Loose fit | Stretch fabric: lightweight and flowing. 

Freedom of movement

2 hand pockets | 1 small pocket inside the left pocket for your phone. 

Available in 9 sizes: from XS-S to 3XL-4XL | Drawstring at the waist

Wide elastic waistband: covers the hips, lower back, and stomach.

User comfort

Softness

The materials contain polyester to wick moisture away.

Quick drying

These pants were designed for occasional hiking in mild weather on flat terrain, in forests, or along the coast.

Ironing at a maximum soleplate temperature of 110°C. Steam treatment may cause irreversible damage.

reinforced area

belt height

Place of Practice

Options

modular

Our priority: to make hiking clothes fit bodies of all shapes and sizes, to ensure everyone can enjoy hiking in complete comfort. That’s why these pants are available from size XS-S to 3XL-4XL.

Available in size XS to 3XL

Women's Hiking Pants

Cushioning

The sole composition and design provide a good grip on walking trails.

Grip

Waterproof, breathable membrane | Tested for a 6-hour hike in the rain

Soft collar and seamless heels for comfort.

Fitting comfort

Sole design and 4 mm (0.16”) tread clear mud easily.

Traction

Leather forefoot insert resists abrasion.

Durability

Each boot weighs 325 g (11.5 oz.) in size 6.5.

These comfortable leather shoes have a soft collar and seamless heel. They are waterproof so your feet will stay dry when walking.

Removable Sole

Shoe Height

Foot Width

Tightening Type

Our hiking boots provide extra comfort. This hiking boot has an EVA foam midsole and insole (ethylene vinyl acetate), and the neck of the shoe (top of the heel) includes synthetic foam.
We also made the heels seamless.

How do you measure comfort for the NH 500 Leather Hiking Boots?

We conducted tests on various elements of the shoes, including tear resistance of eyelets and straps, bonding, toxicology, UV resistance, abrasion resistance of outsole and upper components, and accelerated aging.
We use a variety of tests to improve the quality of our products and prevent premature wear for our hiking shoes.

How do you measure durability for the NH 500 Leather Hiking Boots?

The sole design is the result of extensive research conducted in our labs. The sole is composed of a specific rubber formula that optimizes grip and traction. We are always looking for the best solution for walking on forest and coastal trails.
Wearing the boots on paved roads can lead to the premature wear and cause discomfort. Not suitable for mountain hiking.

How do the NH 500 Leather Hiking Boots provide grip on hiking trails?

These boots are somewhat breathable, but not enough to wick away all moisture. We recommend the Hike 100 Low or Mid Socks. They contain moisture-absorbing cotton and have a reverse terry-knit structure underneath that wicks moisture away from your feet. They’re also high enough to protect your ankles. High socks reduce the chance of blisters.

Which pair of socks should you wear with the NH 500 Leather Hiking Boots?

We conducted lab tests that simulate walking with the boots half-submerged in water. We also conducted field tests to measure wear and aging. During the waterproofing test, we test 3 levels of waterproofness: 2,000 flexes (30-minute hike), 10,000 flexes (3-hour hike), and 30,000 flexes (6-hour hike). This boot has been tested for up to 30,000 flexes, equivalent to a 6 km (3.7 mile) hike.

How waterproof are the NH 500 Leather Hiking Boots?

- Leave to air dry.
- Remove dry mud with a stiff brush.
- Clean stains with a brush and a little lukewarm water.
- Air dry.
- Use a re-waterproofing spray (product ref. 8677748) to restore water repellency to the upper.

Care instructions

Women's Hiking Shoes

Waterproof coating 5,000 mm (Schmerbers) | Taped seams

Protects against winds of up to 70 km/h (43 mph)

Hydrophilic coating (RET = 12): reduces condensation inside the garment.

One zipper pocket | The jacket can be packed into its own pocket

Light and compact rain jacket | Weight: 180 g (6 oz.) in size S-M

This jacket offers ideal protection from light rain during your hikes. 

To maintain water repellency, we recommend regular reactivation.  
Reactivate water repellency after three washes (remember to rinse thoroughly) or after using a dozen times in the rain. 
You can easily reactivate water repellency by warming the fabric: 
- in a dryer for 15 minutes (synthetics cycle) - with a hair dryer, moving back and forth from a distance of 20 cm (8”), twice
- with an iron on the delicate setting and with the steam function off

Long-lasting performance 

The fabric of this jacket is breathable: RET = 12.Component breathability is measured using thermal evaporative resistance (RET). 
RET refers to a fabric’s capacity to let perspiration evaporate. 
The lower the RET, the more breathable the fabric. 
RET ≤ 6: very breathable fabric
RET ≤ 12: breathable fabric
RET ≤ 20: little or no breathability

This rain jacket has been designed for a two-hour hike at a pace of up to 5 km/h (3 mph), without elevation gain.
How much you perspire depends on the intensity and duration of your physical activity.If the fabric is not breathable enough for your activity, perspiration will condense inside the jacket.This makes you feel damp.This dampness is not rain soaking through the shell, but condensation caused by perspiration.You need to choose a rain jacket according to your type of physical activity.

Choose your waterproof jacket according to the intensity of your activity. 

Wear the NH 500 Raincut Rain Pants to protect your lower body, too. Then you’ll have complete, effective protection against wind and rain.


Additional product recommendations

1 closing pocket | Light and compact | Folds away in its pocket

Drawstring waist | Hem tightens with a rip tab

Hydrophilic coating (RET = 12): limits condensation inside the garment.

The fabric of the rain pants protects you from winds of up to 70 km/h (43 mph).

Lightweight, compact rain pants | Weight: 165 g (6 oz.) in size M

These waterproof rain pants are designed to protect you from light showers during occasional hikes.

maternity

The component isn’t the only thing that makes these pants waterproof: the assembly also makes a difference.
The overall waterproof properties of your rain pants are measured with a shower test developed by Decathlon that simulates rain of varying intensity.
The Raincut Waterproof Rain Pants protect you from small showers equivalent to 6 cm (2.4”) of rain in 1 hour.

To maintain water repellency, we recommend regular reactivation. 
Reactivate water repellency after three washes (remember to rinse thoroughly) or after using a dozen times in the rain. 
You can easily reactivate water repellency by warming the fabric: 
- in a dryer for 15 minutes (synthetics cycle) - with a hair dryer, moving back and forth from a distance of 20 cm (8”), twice
- with an iron on the delicate setting and with the steam function off

Performance in the rain

The fabric is breathable: RET = 12.
Component breathability is measured by thermal evaporative resistance (RET). 
RET refers to a fabric’s capacity to let perspiration evaporate. 
The lower the RET, the more breathable the fabric.   
RET ≤ 6: very breathable fabric 
RET ≤ 12: breathable fabric
RET ≤ 20: little or no breathability

This product is designed for hikes lasting several hours while walking at a pace of no more than 5 km/h (3 mph).
How much you perspire depends on the intensity and duration of your activity.If the fabric isn’t breathable enough for the type of exercise, your perspiration will condense inside the item.The jacket will feel damp inside.This dampness is not rain soaking through the shell but condensation caused by perspiration.This means you need to choose rain pants suitable for your activity.

Choosing waterproof rain pants based on physical effort

Foam padded back and straps, ventilated fabric. Adjustable straps. Thumb loops

1 large compartment, 2 zippered pockets, 1 bottle holder

Multiple compartments

Compact, lightweight: 10 L, 190 g (6.7 oz). 40 x 22 x 15 cm (15.7 x 8.7 x 5.9”)

Abrasion-resistant components and seams. 10-year warranty.

A comfy backpack for those shorter hikes. Padded back and shoulder straps with breathable fabric, plus adjustable straps and thumb loops.

reflective

The components are designed to withstand the demands of walking outdoors. That’s why we test the durability of the materials and the resistance of the bag: nothing is left to chance. We even simulate your adventures with our hiker testers!

Choosing a durable backpack?

At Decathlon, all of our Quechua backpacks are guaranteed for 10 years against normal product wear and tear. In the case of a defect, we recommend its repair, replacement, or a refund. The guarantee covers the components from the zipper to the seams: more information can be found on our website.

Quechua backpack: 10-year warranty.

This backpack has a large compartment for your essentials, two zippered pockets, one with an inner pocket for your valuables. A stretchy mesh pocket on the side also fits your water bottle or umbrella.

What is its storage capacity?

By developing your product, we have enhanced the comfort with adjustable straps and vertical foam pads on the back. The ventilated fabric on the back and straps provides better ventilation. As a bonus: thumb loops.

How comfortable is this backpack?

This backpack is water-repellent. In light rain, water will roll off without penetrating it. However, it is not completely waterproof. If the rain goes on too long or is too heavy, water will seep through. For extra protection, choose our 10–20 L rain cover (ref. 8772113).

Is this backpack waterproof?

The coated fabric protects your backpack against the rain.

Compatibility

2 elastic hooks attach around your backpack’s shoulder straps.

Visibility

Compact design

Hand wash. Dry thoroughly before storing. Do not machine wash. 

Easy maintenance

This rain cover is designed to protect your backpack from the rain (10 L to 20 L backpacks) and make you visible.

Bag Type

Type of Cover

This specific colour means you are always visible outdoors on all trails, even in the fog or in case of a problem.

Why are our rain covers yellow?

Hiking Backpacks & Bags

Cushioning with 2 EVA inserts: 3 mm at front and 8 mm at back of the boot.

TPR sole with 3.5 mm (0.1”) lugs for natural trails with a low gradient.

Removable insoles so you can insert orthopedic insoles if needed.

Synthetic detailing on the front foot for abrasion resistance.

The 3.5 mm (0.1”) treads and sole component work together to remove mud easily.

Each boot weighs just 297 g (10.5 oz.) in size 6.5.

These hiking shoes are designed for walking on flat trails by the sea, in the forest, or in the countryside.

Type of Shoes

Season

Playing Surface

Our hiking shoes offer heightened comfort. We included various design features to take care of your feet, such as the EVA foam insole (flexible thermoplastic) and heel pad.
We also made the insoles removable so they can be washed.

How comfortable are the low NH 50 Hiking Boots? 

Designed in our laboratories with a special rubber formulation to optimize the grip and traction of the sole. We research the best sole for hiking on muddy ground (grip) and on dry ground (traction).

What is the grip of the low NH 50 Hiking Boots like on footpaths?

Our hiking boots are designed for hiking trails. We test the sole and upper components we’ve chosen for our footwear to ensure they’re perfectly suited for walking on unpaved trails, such as forest paths, as well as on rocky coastal trails. Wearing them on paved roads can cause premature wear and discomfort. They’re not suitable for mountain hiking.

Sports/

Hiking & Camping/

Hiking Gear/

Hiking Footwear/

Hiking Shoes/

Women's Hiking Shoes/

quechua

Women’s Waterproof Hiking Shoes, NH 100