Waterproof coating for 2 h of protection (5,000 Schmerbers), 100% WTP seams

Waterproof

Hydrophilic coating (RET = 12): limits condensation inside the garment.

Breathability

The elastic waistband and loose fit make them easy to put on over pants.

Freedom of movement

Only weighs 146 g (5 oz.) in size 10–11 years.

Lightweight

Designed to protect your child from the wind and rain.

Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.

Maximum washing temperature 30°C. Normal cycle.

Frequency

reinforced area

Number of Pockets

belt height

Weather Conditions

Place of Practice

modular

Windproof

Pocket

Type of Length

Type of Bell

Schmerber

Main Material

This garment has been subjected to a shower test using 60 L of water/sqm/hour for 2 hours. This test reproduces the average conditions of a rain shower in the mountains.
A waterproof rating of 5,000 mm means the fabric can withstand pressure exerted by 5,000 mm of water (the equivalent of a rain shower lasting for two hours).
 Waterproofing is expressed in Schmerbers (for example: 5,000 Schmerbers).

Waterproof feature of the component

Component breathability is measured using thermal evaporative resistance (RET). 
RET refers to a fabric’s capacity to let perspiration evaporate. 
The lower the RET, the more breathable the fabric. 

RET ≤ 6: very breathable fabric
RET ≤ 12: breathable fabric
RET ≤ 20: Little breathability.
 
Our product has a 12 RET rating.

Component breathability

A fabric is water-repellent when water slides off its surface without being absorbed. It prevents the fabric from soaking up water, keeping it lightweight, warm, and breathable. Water repellency is achieved by treating the fabric’s exterior. This treatment must be renewed throughout the garment’s lifetime (every 3 washes). 

Component waterproofing

Technical details

Kid's Hiking Pants

Component prevents rubbing on natural elements.

Abrasion resistance

Your child will stay dry even in a short rain shower.

Water repellent

The wide elastic waistband adapts to most body shapes.

Anatomic design

3 zipped pockets (2 pockets + 1 back pocket)

Pockets

Only weighs 460 grams (16.2 oz) in size 10–11 years.

These softshell pants were designed for hiking in all weathers and for all types of outdoor activities.

Season

Sportsperson’s Height

Options

Resistance to wear and abrasion test: for example, we test our fleeces in the lab to ensure they do not pill. Colourfastness test: we check colourfastness to ensure colours don’t bleed if they come into contact with saliva. Aging test: Verifies that repeated washing does not alter the fabric’s properties, performance, thickness, or appearance.

Fabric durability

The fabric is treated to ensure water repellency. The treatment prevents water from staying on the fabric’s surface and limits its ability to absorb water. Water runs off the fabric. Thanks to the fabric’s water-repellent properties, water does not soak into it.

Water-repellent properties

Wind protection is very important because of the significant chilling effect wind can have on the body. According to the wind chill model, a temperature of 5°C with a 30 km/h wind feels like 0°C, and a temperature of 0°C with a 30 km/h wind feels like -6°C. Protecting against wind chill

Created in our international design centre at the foot of the Mont Blanc in France, these pants are then manufactured and assembled by our suppliers in Vietnam and Bangladesh.
These are partners that have genuine expertise in making our pants and with whom we collaborate closely. 
Thanks to this relationship of trust with our industrial partners, we can create high-quality technical products.

Where do our rain pants come from?

Waterproof coating (10,000 Schmerber), 100% taped seams.

Weighs only 350 g (12 oz.) in size 10 years.

Hydrophilic coating (RET = 12): reduces condensation. Two ventilation zippers.

Ventilation

Durable ripstop fabric withstands abrasion. 2-year warranty. 

Robustness

This waterproof, breathable jacket offers great comfort at a great price.

Ventilation Zippers

sleeve length

type of waterproofing

breathability (in RET)

Removable Hood

Hood

Style

Zipper Type

We measure a fabric’s resistance to water pressure, expressed in terms of the height of a water column in mm (based on the ISO 811 standard). The higher the water pressure, the more waterproof the fabric. A component with a 10,000 mm rating can withstand the pressure of a 10,000 mm column of water (which is equivalent to a 3-hour rain shower). Waterproof rating is expressed in Schmerber units (for example: 10,000 Schmerbers).

Component breathability is measured by thermal evaporative resistance (RET). 
RET refers to a fabric’s capacity to let perspiration evaporate. 
The lower the RET, the more breathable the fabric.   
RET ≤ 6: very breathable fabric 
RET ≤ 12: breathable fabric
RET ≤ 20: little breathability
 
Our product has a 12 RET rating.

Component resistance

A coating applied to the fabric makes it waterproof and windproof. Technically, a waterproof fabric is also windproof. Protection from the wind is critical, as wind can really chill the body during physical activity.

Windproof effect

Cuffs adjust with hook and loop tab straps. Extra length at the back protects kids when sitting down. Two ventilation zippers at the front. Media pocket with headphone feed.

1. Machine wash (30°C): fasten rip tabs and use mild detergent. Wash jackets and pants inside out. Loosen straps and elastics. 2. Avoid bunching the garment in the washing machine: this can damage it. 3. Do not mix garment types and colours. 4. Do not use bleach. 5. Choose a long rinse and gentle spin cycle. 6. Drying: Either line or tumble dry (low temperature, short cycle).

Care

To help preserve nature, Quechua is committed to limiting the environmental impact of its products.  
While not yet eco-designed, we work every day to make this product even more environmentally responsible: eco-design, repairability, and sustainability drive our development efforts.

Our environmental approach

Created in our international design centre at the foot of the Mont Blanc in France, this product is then manufactured and assembled by our suppliers in China and Vietnam.
We collaborate closely with are partners who have genuine expertise in making our products. 
It is through this relationship of trust that we can create high-quality technical products.

Where do our jackets come from?

We guarantee that our suppliers comply with our code of conduct. These suppliers are often located in developing countries where our presence helps create jobs.
By conducting audits and having teams on-site, we make sure that the working environment of the employees meets certain quality standards in terms of human respect and personal fulfillment.

Working conditions in our production workshops

Kids' Hiking Jackets

Waterproof protection for 1 hour (5,000 mm) before washing; taped main seams.

Hydrophilic coating (RET=12): reduces condensation.

Ventilated back for greater comfort when hiking.

Weighs 312 g (11 oz) in size 10–11 years.

A waterproof hiking jacket to protect your kids from the wind and rain.

Maximum wash temperature of 40°C. Normal cycle.

The resistance of a fabric is measured by the height of a water column in mm that can be supported by the fabric (test based on the JIS 1092 standard).The higher the water pressure, the more waterproof the fabric. 
A component with an impermeability of 5,000 mm will therefore withstand the pressure exerted by 5,000 mm of water (which corresponds roughly to a 1-hour downpour). Waterproofing is expressed in Schmerber units (for example: 5,000 Schmerbers). This number applies before washing.

A coating applied to the fabric makes it waterproof and windproof. Technically, a waterproof fabric is also windproof. Protection from the wind is critical, as wind can chill the body during physical activity.

Component breathability is measured by its thermal evaporative resistance (RET). 
This allows perspiration to escape during physical activity, preventing it from accumulating on the skin. 
The lower the RET, the more breathable the fabric. 
RET ≤ 6: very breathable fabric 
RET ≤ 12: breathable fabric 
RET ≤ 20: little breathability
 
Our product has a 12 RET rating.

Created in our international design centre at the foot of the Mont Blanc in France, this product is then manufactured by our suppliers in Vietnam, Ethiopia, and Bangladesh.
These are partners that have genuine expertise in making our products and with whom we collaborate closely. 
Thanks to this relationship of trust with our industrial partners, we can create high-quality technical products.

2in1: pants & shorts at the same timeAdapt them to the adventure of the day

Flexibility

Ultra-resistant: Ripstop fabric and reinforced knees. 3/5 abrasion resistance

Quick drying thanks to its moisture-wicking fabric

Quick drying

1 hook and loop strap cargo pocket, 2 hand pocket, 1 zippered pocket

These convertible pants transform into shorts with the pull of a zip. Adapt them to your adventures and the weather. Comfort and practicality for little hikers!

Customization

Fastener Type

These convertible pants are ideal for your adventurous children! They transform from pants to shorts in a flash thanks to their clever zip. Unisex and comfortable with an over-the-knee cut, they're perfect for any situation.

What makes these 2-in-1 pants so good?

Designed for brave explorers, these pants will follow them on their wildest adventures. Their ultra-resistant “Ripstop” fabric stops snags from spreading. Reinforced at the knees, they can handle falls and off-piste adventures.

Can they handle budding adventurers?

With its multiple pockets (cargo, hook and loop strap, zip), it offers a safe storage space for all your hiking treasures. Shells, stones or small souvenirs: everything stays put until you return.

Why so many pockets?

Our ultra-fast-drying fabric is a major plus for your child's comfort when hiking. No longer worry about getting splashed with water or sweating. They’re also very practical after washing, so you can get on with the adventure straight away.

Quick drying, a real plus?

Machine-wash at 30°C on normal cycle, which is best suited to these convertible pants. Always wash the pants with the lower legs zipped on to maintain a uniform colour.

How do I wash my child's 2-in-1 pants?

These 2-in-1 pants are available in 5 sizes from 7-8 years to 14-15 years.

What sizes are available?

250 g/m2 density fleece. Thermal comfort between 0°C and 5°C.

Warmth

Touchscreen-compatible thumb and index.Perfect when using a phone with gloves.

Dexterity

Thin, stretchy gloves for greater comfort and freedom of movement.

Stretch

Putting these gloves on is child’s play with this easy wrist strap.

Easy dressing

Warmth and dexterity with our fleece-lined gloves: Optimum insulation, for guaranteed comfort from 0°C to 5°C, fleece density 250 g/m².

Condition

Reinforced Palm

Air Temperature

leash

Tightening Type

Thanks to its ability to trap air and use it for insulation, the lining keeps your kids’ hands warm. They’ll stay warm on cold days with optimal thermal comfort between 0°C and 5°C.

Why wear fleece gloves?

The thermal resistance test shows the loss of heat between the body and the outside, indicating the insulating properties of the product. It uses a thermal hand with sensors that measure the retention of body heat.

How is thermal comfort measured?

Water-repellent fabric allows water to run off the surface without seeping in. These gloves are fully water-repellent. In the event of light rain or snow, your children’s hands will stay dry.

Fully water-repellent gloves

To help your children gain autonomy, we added a wrist strap. Your child can easily pull them on by pulling this strap.

Are these gloves easy to put on?

Weighs only 45 g (1.6 oz.) in size 10 years! They fit easily into a bag or clothing pockets.

Are my gloves lightweight?

Care instructions:

Winter Hiking Gear

10,000 mm H2O membrane (Schmerbers) for 30 mm of rain over three hours

Ripstop fabric for increased resistance to wear and tear

Durability

They can be put on and removed without having to remove your shoes.

Ease of use

Compact & clever, they can be stored in the built-in pocket & slipped into a bag

Compact design

These overtrousers have a 10,000 H2O (Schmerber) membrane and can withstand 2 mm of rain in 3 hours. Your children stay dry and the adventure continues!

We’ve designed these waterproof overtrousers for hiking or playing outside, even in the event of rain or changeable weather. Owing to its 10,000 mm Schmerber waterproof fabric (equivalent to a three-hour storm), they will stay dry.

How waterproof is it?

The Schmerber rating measures the waterproofing ability of a fabric. The higher the number, the drier you stay. With 10,000 mm H2O (Schmerbers), these overtrousers can withstand a water column of 10 m! Validated at 4/5 by our shower test, it will keep your children dry for up to  three hours of rain. 

What is the Schmerber?

Designed to withstand all your little explorers' adventures, these overtrousers are made with "Ripstop" fabric. This innovative material prevents tearing, even after a fall or snag.

Are these kids’ overtrousers durable?

Thanks to the practical gussets on the lower leg, your child can put them on quickly, even while wearing their shoes. No need to stop for any length of time when the rain is looming. A simple movement, and off they go! Your little adventurer is ready to continue their explorations, keeping nice and dry.

Are they easy to put on?

When the sun shines, don’t feel weighed down! These clever overtrousers are actually very small. Fold them into the built-in pocket and slip into the bottom of a bag. Compact and discreet, they patiently await their turn.

Can you store them anywhere?

Make the waterproofing properties of your overtrousers last longer! Reactivate every three washes or after 10 uses in the rain. Three easy methods: 
- 15 mins in the tumble dryer (synthetic cycle) ,
- 2 passes over with a hairdryer from 20 cm away

How to restore water repellency

These waterproof overtrousers are available in three sizes: 
- 7-9 years 
- 10-12 years 
- 13-15 years 

Available sizes

Double-sided microfleece. 200 g/m² density for optimal warmth. High collar.

Polyester knit: lets the body's moisture pass through (RET=6.3). 
Full zipper.

Machine washable at 30°C, quick drying, and crease-resistant.

Ease of Maintenance 

A zippered fleece jacket that will become your child's best friend for staying warm on outdoor excursions. 

pattern

Collar Type

A warm fleece is good, but a warm, stylish fleece is even better! This fashionable fleece has a colour block look your child will love. We also added 2 zippered pockets for kids to store small items safely. 

Your child will love this fleece 

Your kids need to stay warm during their outdoor activities. With this fleece, there's no need to worry. The fleece fabric traps air, creating an insulating barrier.

A fleece that parents will love

If their clothes are not breathable, kids can quickly get too hot when they’re playing. We selected a breathable fabric that wicks away moisture even at high activity levels so this fleece jacket remains comfortable.

A comfortable fleece for high-intensity exercise

The breathability of a fabric is measured by its evaporative resistance or RET (ISO 11092 standard): The lower it is, the more breathable the fabric. Examples: RET < 9 (very breathable), 9 < RET < 12 (breathable), RET > 20 (low breathability).
This fleece jacket has a RET of 6.3.

What is the RET index?

This fleece is available in the following sizes: 
- Age 7-8 
- Age 8-9 
- Age 10-11 
- Age 12-13 
- Age 14-15 

Wash the fleece at 30°C on a synthetics cycle to avoid damaging it. Wash it inside out with the pockets closed. To protect the fabric, do not exceed a 1,000 rpm spin speed. Do not tumble dry.

How should I care for this zippered fleece? 

Kids' hiking shirts

Versatility

Rub the scraper across the rod to create sparks.

Power

This firestone is designed for easily lighting your stove or your wood fire while camping in the mountains.

Cook/Drink/Eat

Packaging

Keep out of reach of children.
Learn to use the product before attempting to light a camping stove.

Precautions

We chose to manufacture this firestone in France
The ferrocerium rod comes from Austria.

The story behind this firestone

Weight: 40 g (1.4 oz)
Firestone dimensions: 9 cm x 3 cm x 1 cm (3.5” x 1.2” x 0.4”)
Ferrocerium rod dimensions: 6 cm x 0.8 cm (2.4” x 0.3”)
Scraper dimensions: 6 cm x 3 cm (2.4” x 1.2”)

Weight and dimensions

Hold the ergonomic handle firmly between your thumb and forefinger.
With the other hand, quickly rub the steel scraper along the rod to create sparks!

The black coating on the stone will disappear with use. 

Directions for use

Camping Utensils Set

EVA fabric, 100% waterproof.
Taped seams. 

One size for kids from 126 to 156 cm (50 to 61”) approximately

Compatibility

Comes with a bag.
Size: 18 x 20 x 2 cm (7 x 8 x 1”)

Designed for kids who love to hike in all weather conditions and need proper protection.

126 to 156 cm (50 to 61”) approximately for kids
The snaps make this poncho easy to get on and off.

Sports/

Hiking & Camping/

Hiking Gear/

Hiking Clothes/

Hiking Jackets/

Kids' Hiking Jackets/

quechua

Kids’ Waterproof Hiking Jacket - MH 900 Black Ages 7-15