clearance

Removal using an open-ended spanner and a chain-whip tool.

Compatibility

Removal using a 21 mm open-ended spanner and a chain-whip tool.

Ease of use

Robustness

This tool was designed for removing and/or mounting your Shimano or Sram type cassette

Condition

Intensity

A chain-whip tool is needed to use this tool for dismounting a cassette.
The chain-whip tool prevents the cassette from turning, so that the support nut can be unscrewed.

Advice from our team

Bike Cassettes

Coating applied to enhance the tool's corrosion resistance.

Corrosion resistance

The pedal wrench is designed specifically for installing or removing pedals.

Frequency

Length: 236 mm (9.3 in)
Height: 48 mm (1.9 in)
Thickness: 13 mm (0.5 in)
Weight: 143 g (5.0 oz)

Features:

The pedal wrench is for installing or removing pedals.The handle is longer than on our previous model, giving you extra leverage for easier adjustments.

What is this tool for?

Pedals are specific to each side: one for the right side and one for the left side, and it's important to check the direction for fastening them before installation.

Did you know?

It's recommended to oil up your pedals to make them easier to remove in future. (Reference 8874174)

Maintenance advice: 

Bike Tools

Compatible with all 1- to 12-speed quick-release chain links.

Perfect for removing and reattaching quick-release links.

Designed for optimal efficiency, this quick-link chain tool allows you to remove the quick link from your bike chain in a single step. 

Length: 158 mm (6.2″)
Width: 68 mm (2.7″)
Thickness: 8.1 mm (0.3″) 
Weight: 72 g (2.5 oz)

Features

The quick link chain tool is for removing and installing the chain's quick link. The perfect way to quickly remove links when carrying out repairs. 


Positioning: 
Shift the chain onto the small chainring and the small sprocket.
Disassembly: Work on the lower section to prevent sudden lash-back. Derail the chain or use a hook to slacken it.
Caution: 
Carefully locate the quick link. Place the plier handles on either side of the quick link, without applying force anywhere else.

Re-installing:
Position the link on the bottom and check that it’s securely fastened. 

Advice from the team

For Shimano® Hollowtech II-type bottom brackets.

Holds the bottom bracket securely at 360° to help prevent damage. 

Designed for the easy installation or removal of bottom brackets. Compatible with Shimano and SRAM splined models. 

Length: 56 mm
Width: 32 mm
Thickness: 32 mm

Weight: 148 g (5.2 oz)

Use the bottom bracket wrench to remove and install bottom brackets. 

Tightening and loosening: 
The thread direction will be different on opposite sides of the bike. Check before applying force.
Alignment: 
Always keep the wrench perfectly straight and parallel to the frame. Misalignment increases the risk of the tool slipping and damaging itself or the housing.

This degreasing brush allows for an efficient application of your degreaser.

This brush is ideal for applying your plant-based degreaser to your bike's drive train (chain, derailleurs, cassette, etc.). 

Application Type

Volume (ml)

Type of Brush

To ensure optimal maintenance, we recommend that you follow these three steps: 
1) Degrease your drive train
2) Clean your bike
3) Lubricate your chain

With this bike degreasing brush, you can apply your plant-based degreaser to your drive train and complete Step 1.

How to maintain your bike

This brush comes with a protective cap, allowing you to place it easily on a workbench or shelf, protect the bristles from being crushed, and keep your toolbox clean.
Do not pour degreaser directly into the brush, as it may overflow when inserting the brush, leading to unnecessary waste.

Features: 

11-speed chains and derailleurs: Shimano, Sram, MicroShift, and KMC

Designed for road biking and use with direct drive home trainers.

Skill Level

Set of Teeth

Number of Speeds

Cogs: 11-12-13-14-15-17-19-21-24-28-32.
11-28 gearing.
Weight: 375 g (13 oz.).


Teeth

Degrease, clean, and lubricate your cassette regularly for prolonged life. We recommend replacing the chain each time the cassette is replaced. Do not clean using high-pressure water jets

Care instructions

Easy assembly with a cassette remover wrench, available on our website 
(ref: 8608966) and an adjustable or open-ended spanner.

Assembly

Easy disassembly with a cassette remover wrench, available on our website 
(ref: 8608966) and an adjustable spanner or open-ended spanner and a chain-whip tool.

Dismantling

The 3 products are suitable for every kind of bike, mechanical, or electric.

Get your drive train and your bike in perfect shape.

Visual efficiency

With its compact size, you can take the kit everywhere with you.

Compact design

This bike cleaning kit follows just 3 steps: degrease, clean and lubricate. Care for your electric, road, city, mountain, hybrid bike and more.

Maintaining your bike will let you:
- Extend the life of the various components 
- Ensure that it works properly
- Reduce unwanted noise
- Prevent breakages
- Enjoy the pleasure of riding a clean bike

Why should you maintain your bike?

To ensure full maintenance, we recommend that you follow these 3 steps: 
01. degrease your drive train
02. clean your bike
03. lubricate your chain

How to look after your bike

This kit contains the 3 products needed to carry out the 3 steps required to properly maintain your bike. You will be able to carry out at least 3 full services on your bike.
Products included in the kit: 
01. Plant-based degreaser (100 ml)
02. Concentrated bike cleaner (100 ml)
03. All-weather chain lubricant (50 ml)

Kit contents

This degreaser lets you effectively degrease your drive train. You can apply it using a brush or our chain cleaner. 
Application with a brush: pour about 25 ml into a pot and apply generously to your chain, cassette, derailleurs and derailleur pulleys. Leave for a few moments then move on to step 2.
Application with the chain cleaner: pour on about 9 ml, turn the pedals a few times before moving on to step 2.

How to use the drive train degreaser

Pour about 30 ml of concentrate into a bucket of water then apply generously with a sponge to the whole bike. 
The product will not damage the paint or any other components of the bike.
Rinse with clean water then dry your bike. Pay particular attention to drying, especially your drive train, to ensure total efficiency later on. Now you can move on to step 3.

How to use the concentrated bike cleaner

Remove the cap, position the applicator on the lower part of the chain (inner side) and make a full turn (in the opposite direction to pedalling). 
To make sure you don’t apply too much, use your quick-release as a guide.  
Remove the excess lubricant with a cloth placed under the chain, then do 2 or 3 complete turns of the pedal (in the opposite direction).
The lubricant will protect your chain in all riding conditions.

How to use your chain lubricant

01. degrease your drive train if you’re applying the product with a brush, be careful not to project the dirt towards you.
02. concentrated bike cleaner: in winter, use warm water to make this step easier and use cold water in the summer.
03. chain lubricant: apply on the inside of the chain, position the applicator on the lower part of the chain.

Good to know

Remember to degrease your chain before applying new grease in order to remove any residue that could make abrasive contact with your drive train. This will help your equipment last longer and save you money.

Maintenance advice

Made in

List of ingredients:
Mix of saturated and unsaturated fatty acid methyl ester PEG-30 glyceryl cocoate 
Each ingredient is given with its INCI name (International Nomenclature of Cosmetic Ingredients)

Drive train degreaser composition

Concentrated cleaner composition

Synthetic oil with additives and anti-wear properties, corrosion protection and wash resistance.

Chain lubricant composition

Pre-shaped medium density foam pad.
Thickness: 13 mm
Density: 100 kg/m3

Sitting comfort

Moisture management

Stretchy fabric ensures shorts stay in place at the waist and thighs.

Freedom of movement

Fully co-designed cycling shorts. Special attention was paid to the waistband and hems: an excellent fit without excessive pressure!

Maximum wash temperature of 30°C. Very delicate cycle.

Length

Season

reinforced area

retaining strip

Weather Conditions

Stitching Type

Pocket

Type of Length

Zipper Type

With Straps

Main Material

To ensure greater comfort in the saddle, we created this medium density chamois pad.
The fabric is soft and breathable. The padded zone is soft, with a density of 100 kg/m3 and a thickness of 13 mm. Perforated fabric actively wicks away perspiration. The pad keeps you comfortable on rides of up to 2 hours.

Our new medium density pad

The shape of the padded zones was defined by tests on a sheet of pressure, designed from a dummy moulding and approved after various trials and usage tests. These tests, conducted on real cyclists, involved measuring the pressure points on the saddle. The padded zone covers contact points where pressure is greater. There is a dart at the front for a better fit.

Shape

The ischium bone and the perineum are covered and protected. The reinforced area between the legs is relatively narrow to prevent irritation from rubbing while pedalling. Channels have been embossed into the reinforcements to provide greater flexibility.

Reinforced areas

Machine wash at 30°C. Wash on a synthetics cycle. Turn the garment inside out. Do not add fabric softener. Hang to dry in a warm, well-ventilated area. Do not tumble dry. Do not dry clean. Do not add bleach. Do not place on a heater to dry.

Based at the Btwin Village in Lille, our product design team constantly works to make cycling more comfortable for our users.
We strive to create products that meet our users’ specific cycling needs and eliminate unnecessary features.We then test our products in the field, as we are convinced that subjecting them to real-world conditions, like the ones you experience on your bike, is the only way to continuously improve our products.

Product tests

Men's Leggings

Very thin material for better moisture management.

Elastic bands at the ankle, the arch of the foot, and the tibia.

Stability

High-quality technical socks that go up to the base of the calf.

Maximum wash temperature of 40°C. Normal cycle.

height of the sock

Style

Packaging

Sock Height

Socks developed in collaboration with Trerè Innovation srl in Italy to meet the needs of the most demanding cyclists; inspired by the products worn by professional cyclists. 


Development 

Mid-rise sock measuring 20 cm (8") high in size 6½-8.
The height doesn't vary much between sizes.

Sock height

Men's Socks

100% effective on all types of Butyl inner tubes.

Less restrictive and just as effective as a classic patch.

Easy assembly/dismantling

This self-adhesive patch kit lets you easily and quickly repair punctures so you can carry on enjoying your bike rides.

Tire Assembly

Assembly Type

1. Remove the inner tube and locate the puncture
2. Roughen the area around the puncture using the sandpaper
3. Clean and dry this area
4. Apply the self-adhesive patch and press hard on the entire area for around 45 seconds
5. Run your nail over the patch to increase its adhesive power
6. Put the inner tube back in the tire and the tire in the rim
7. Inflate your tire to the recommended pressure.

User tip: 

Optimal lifespan: 3 years at room temperature (16-22°C, 30-70% humidity), away from direct light and in its original packaging.
Minimum temperature for repairs: +10°C 
Temperature for use: -40°C to +65°C

Storage:

Be careful not to touch the sticky part when positioning the patch, so as not to reduce its sticking power.
Remove any air bubbles by pushing from the centre of the patch towards the edges.
Rub the patch with your nail to warm it up and help it stick better.
Finally, press firmly with your thumb, covering the entire patch for 45 seconds to 1 minute (press on a clean, flat surface for greater effectiveness).

Applying the patch: 

A good sanding of the area concerned will give you a better result.
The aim is to obtain a flat, clean surface so the patch holds as well as possible.If the puncture is close to excess material, sand until the excess is removed.
Sanding will create micro-scratches that will allow the glue on your patch to set more easily.
This stage is very important for a lasting repair.

Sanding: 

Clean away any impurities to ensure a clean, flat, and dry area to apply the patch.
Remember: don't use water or any other product to clean your inner tube after sanding. It's essential to have a clean, dry surface to ensure that your patch lasts.

Cleaning: 

Rockrider

onlyonline

Hub cones adjustment, 13 mm, 14 mm, 15 mm, 17 mm.

Versatility

Weight

Capacity

We designed this spanner for tightening or loosening 13, 14, 15 and 17 mm bike hub cones using a single tool.

Insert directly between the chain's links.

Quickly and easily read the degree of wear on your bike's chain.

Precision

Designed for easily and quickly measuring the degree of wear on your bike chain.

Place your bike on your workshop stand (for greater comfort) or against a wall.
Insert the left-hand side of the tool into a link on your chain (make sure the small hook is well inserted into the link), then lower the right-hand side onto the chain to read the result.
Once it has been properly installed on your chain, the chain wear indicator should lie as flat as possible.

How to use this tool

If the tip of the tool (the right-hand part) does not go beyond the line above the "OK" sign, then your chain and cassette are in perfect running order.
If you press the right-hand tip of the tool in between the 2 lines of the "1", then you need to change your chain.
If you press the right-hand point of the tool beyond the line at the start of part "2", then you need to change your chain and cassette or freewheel.

How to read your result

It all depends on how often you ride.
We recommend that you check the condition of your chain once a month to ensure that your gears shift smoothly and that you don't wear out your cassette or freewheel prematurely. That way, you don't have to change them more quickly than necessary.

How often should you use the tool?

Maintaining your drive train ensures that your gears shift smoothly, extends the life of your components, and eliminates unwanted noise. We advise you to follow the 3 recommended steps:
01) Degrease your drive train;
02) Clean your bike;
03) Lubricate your chain. 
You can find all our maintenance products on our website or in our stores.
Testing your chain wear regularly will prevent premature wear of your drive train.

This chain wear indicator is a precision tool. If the tool is dropped, this could affect its precision and the result obtained. 
Be careful when handling the tool and protect it from being dropped.

Tip from the pros:

Length: 12.27 cm (5")
Height: 2.65 cm (1")
Thickness: 2 mm (7/100")
Weight: 29 g (1 oz.)

Product characteristics: 

Made in: 

Notch to hold the tire lever on the spokes, perfect grip on tire, deflation tip.

Tire lever that clips together for easy storage.

Designed for removing your bike tire. The tip allows you to deflate the tire, while its edges attach to the spokes for greater ease.

PA66 polyamide material avoids breakage when bent.

Tyre lever features: 

Enables you to perform the main adjustments on bicycles, scooters, and skates.

The silicone holder increases its lifespan.

Easy transport

This multitool was designed for making adjustments at home or while out riding on your road bike, MTB, hybrid bike or kids' bike.

Number of Functions

Allen keys: 2/2.5/3/4/5/6/8.
Flat-head screwdriver.
PH2 Phillips screwdriver.
T25 / T30 torx keys.
Mavic® 5.65 mm (M7) spoke wrench.2 Tyre levers3.3 mm spoke wrench.
3.5 mm spoke wrench.
Chain tool.
Decapper.
8 mm / 9 mm / 10 mm hex key.
Crank bolt tightening tool.Each tool can be used separately.

Includes

Height: 12 cm
Width: 5.5 cm
Thickness: 2.4 cm

Dimensions

Spare Parts

Shimano, SRAM, or Sachs Aris freewheel remover

Use with a regular or adjustable wrench or a 21-mm socket.

Designed for fitting and removing Shimano, SRAM, and Sachs Aris freewheels.

Suitable for all internal bottom brackets (square-taper, Octalink, Isis).

Heat-treated, cold-forged, chrome-vanadium steel.

We designed this tool for fitting and removing Square Taper, Octalink and Isis-type internal bottom brackets.

Length: 250 mm (9.8 in)
Width: 62 mm (2.4 in)
Thickness: 13 mm (0.5 in)
Weight: 173 g (6.1 oz)

The chain whip enables you to remove cassettes with sprockets of 10, 11 or 12 teeth and cassettes of 7 to 14 gears.
Use in conjunction with a cassette removal tool and an Allen key (8 mm) and its adapter.

Preparation
Count the number of teeth on the smallest sprocket, set the cassette removal tool accordingly, and make sure you know what direction to turn the tool for unscrewing (counter-clockwise).  
PositioningPlace the chain whip on the smallest sprocket (on the outside).Set the tools at an angle of 10 to 10 (on a clock face) to each other.
 Removal
Use the whip to keep the cassette still and unscrew using the cassette removal tool.
Tip: Use your shoulders for extra leverage. 

Sports/

Cycling/

Bike Tools and Components/

Bike Tools/

decathlon

Chain Whip