Comfort temperature:  -6°C
Limit temperature: -16°C.

Warmth

Breathable and waterproof to keep your feet dry.

Waterproof

Tread with Snow Contact technology: sole materials and tread pattern for snow.

Grip

Easy dressing

The location and depth of the 3.5 mm (0.14”) lugs provide traction on snow.

Traction

Designed so your kids can enjoy the snow! Simple and effective for snowy outings.

Condition

Frequency

type of lining

Removable Sole

Season

comfort temperature

Place of Practice

Outsole Technology

Boots Type

Lining Material

Foot Width

Boot Height

Tightening Type

Main Material

Fastener Type

We perform comparative studies in a thermal laboratory in walking conditions with light winds (5 km/h or 3 mph). This is how we measure the thermal resistance of our boots. Everyone feels the cold differently.Comfort temperature: Felt slightly cold and 70% of users experienced thermal comfort in the boots.
Limit temperature: Felt extremely cold and 10% of users found experienced thermal comfort in the boots.

Are these boots warm enough for winter hikes?

These boots have a membrane to guarantee waterproofing and breathability. A membrane is a very fine component (5 to 25 micrometres) on the inside of a fabric that prevents water from entering, but allows moisture to escape.

How do these boots protect from outdoor conditions?

We made sure that your boots are waterproof by conducting lab tests to simulate walking with the boots half-submerged in water. We also conducted field tests to measure wear and aging. 

Are my boots 100% waterproof?

This product was lab-tested by our engineers to ensure your total satisfaction. We tested the following elements: tear resistance of eyelets and straps, bonding, toxicology, abrasion resistance of outsole and upper components, and accelerated aging.

Will my boots withstand regular use over the long term?

Follow these principles for your winter activities. 
Warmth: wear warm socks (ideally with a good percentage of wool).
 Breathability: choose socks based on the intensity of the hike and, to minimize moisture, make sure they’re breathable.
Boot height: the height of the sock should correspond to the height of the boot—for more protection, choose higher socks.

How do I choose the right footwear for hiking in the snow?

Water repellency is a fabric’s capacity to make water run off its surface without being absorbed. It prevents the fabric from soaking up water, keeping it lightweight, warm, and breathable. Water repellency is achieved by treating the fabric’s exterior. This treatment needs to be reapplied throughout the product’s lifetime. Products for this purpose (spray or liquid) are available in our stores.

How to preserve the technical qualities of the boots

Boots can get wet from condensation and perspiration.
If your boots are very wet, remove the insole, fill the upper with balls of newspaper, and change the newspaper regularly. The paper will absorb the moisture and dry them faster.
Never put the boots too close to a heat source. Leave them in a warm, dry, and ventilated place.

How to dry the inside of your boots

Toddler & Kids Hiking Shoes

clearance

Thin enough to fit easily in a pocket or backpack.

Compact design

Inner label for writing your child’s name.

Customization

This lightweight, stretch-knit hat is perfect for kids who want to stay warm in style!

Maximum washing temperature 30°C. Normal cycle.

Skill Level

reflective

Weather Conditions

Reversible

Breathability

Beanie Length

Windproof

Type of Beanie

Style

Water-Repellent

For the Wedze models, the kids’ size is for head sizes between 52 and 56 cm. Depending on the elasticity of the weave, this measurement can vary slightly. 
For a child whose head size is between 48 and 52 cm, choose a child's model first. Finally, for a child with a head size below 48 cm, choose a baby hat.

Child sizes

Kids' & Babies' Winter Clothing

140 g/m2 fleece. Thermal comfort between 0°C and 5°C.

Polyester knit allows moisture to evaporate.

The fleece material allows these gloves to dry quickly outdoors.

Quick drying

Keep your children’s hands warm: the insulation provides comfort at temperatures between 0°C and 5°C, with 140 g/m² fleece.

Options

reinforced area

The fleece traps air to insulate. These gloves keep children’s hands warm on chilly days. Thermal comfort between 0°C and 5°C

Why wear fleece gloves?

The thermal resistance test measures the loss of heat between the body and the outside, indicating the insulating properties of the product. It’s carried out on a thermal hand via sensors that measure body heat.

How is thermal comfort measured?

These polyester knit gloves combine warmth and breathability. Designed to allow water vapour to wick away, they keep your hands dry, even during intense activities.

Why are these gloves breathable?

The other advantage of fleece material is that it dries quickly. Ideal for all your child’s adventures.

Will these gloves dry quickly?

This pair of fleece gloves weighs only 20 g (0.7 oz) at size 10 years. They can easily be stored in a bag or pockets.

Are these gloves lightweight?

Winter Hiking Gear

This dual-material neck warmer effectively protects from the cold.

Two fabrics mean it can be worn six different ways.

Flexibility

When worn over the nose, it provides effective moisture wicking.

Moisture management

This neck warmer is practical and easy to use. The dual materials mean kids can easily adapt the warmth around the neck.

Maximum wash temperature of 30°C. Very delicate cycle.

pattern

modular

The Hug Neck Warmer packaging shows six different ways to wear it (hat, balaclava, neck warmer, etc.).

Protects from light rain. Water slides off and is not absorbed by the fabric.

Water repellent

Only 406 g (14.3 oz) in size 10–11 years

Lightweight

Very pleasant liner fabric, used also in the hood

Softness

Stretch fabric to encourage freedom of movement.

Freedom of movement

2 zippered pockets to carry your belongings safely

Pockets

This padded jacket lets kids get the most out of cold-weather activities. It's just as good for school as it is for getting around town.

Number of Pockets

sleeve length

Air Temperature

Pocket

Pack

thumb pass

Type of Length

Hood

Zipper Type

Water repellency is achieved by applying a treatment to prevent water from absorbing into the fabric. 
Water rolls off without being absorbed so the garment remains light, breathable, and warm. This product is water-repellent, not waterproof.
The treatment should be reapplied to remain effective. Use sprays that are applied to the outside, rather than additives used when washing the garment, which can damage the product’s breathability.

Water-repellent properties

Our Quechua global design centre is based in Passy, at the foot of Mont Blanc in Haute-Savoie, France. This location makes it a real meeting place for our teams and outdoor sports enthusiasts. It’s the perfect spot for designing our hiking products.

Product design: our expertise

Kids' Hiking Jackets

Comfort temperature: -8°C
Lining and warm fleece hood.

Waterproof membrane: 15,000 mm (Schmerbers).
Taped main seams.

Fitted cuffs, long jacket, and detachable fur hood.

Limits snow entering

The waterproof membrane makes the jacket windproof.

2 warm and soft zipped pockets
2 mesh inner pockets

You can write your child’s name on the label inside the collar.

Zippers with silicone pull and easy-to-use snaps.

Ease of use

Warm and comfortable, it's designed to make the most of winter. Its urban style makes it suitable for everyday wear over winter.

Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.

Maximum wash temperature of 40°C. Normal cycle.

Ventilation Zippers

Sportsperson’s Height

Type of Layer

type of waterproofing

type of hood

Schmerber

We carried out a comparative study in a thermal laboratory in light wind conditions (5 km/h or 3 mph). 
The comfort temperature is the calculated air temperature where 70% of users have a slightly warm thermal sensation.
For this jacket, it’s -8°C.
Everyone feels the cold differently.

How will this jacket keep my child warm?

The waterproofness of a fabric, provided by a coating or membrane, is measured in Schmerbers or mm (pressure exerted by a column of water). The higher this number, the more waterproof the fabric.
This jacket has a waterproof component resistant to a 15,000 mm water column (15,000 Schmerbers) before washing. This waterproof jacket protects you from a shower, i.e., 6 cm of rain in 1 hour.

Jacket waterproofness

Whatever your cold-weather activity, use the three-layer technique:
Layer 1: A high-tech base layer to wick moisture away from the body and keep your skin dry.
 Layer 2: A fleece jacket or sweater to provide warmth and transfer moisture outward.
 Layer 3: A jacket to protect against the elements (rain, snow, and wind). 
To eliminate moisture, the whole outfit must be breathable.

How to dress properly for hiking in cold weather

The seams of a jacket can be taped to keep water out.
The main seams of this jacket are taped, just like the seams of the hood, collar, shoulders, armholes, and chest.

What does main seams are taped?

A coating or membrane is applied inside to make the fabric waterproof and windproof. Technically, a waterproof fabric qualifies as windproof. Wind protection is very important due to the significant chilling effect wind can have on the body.

Water repellency is a fabric’s capacity to make water run off its surface without being absorbed. It prevents the fabric from soaking up water, keeping it lightweight, warm, and breathable. Water repellency is achieved by treating the fabric’s exterior. The garment should be retreated over its lifespan (recommended after each wash). Products for this purpose (spray or liquid) are available in our stores.

How to preserve the technical qualities of your parka

Comfort temperature: -4°C
 Limit temperature: -13.5°C

The breathable, waterproof membrane keeps your feet dry.

Snow Contact technology: optimal grip and traction on snow.

Perfect both in the city and shallow snow. The leather provides style and protection for everyday use.

Type of Shoes

Shoe Height

Playing Surface

We perform comparative studies carried out in a thermal laboratory, in walking conditions with light winds (5 km/h or 3 mph). This is how we measure the thermal resistance of our boots. However, every individual feels the cold differently.
Comfort temperature: felt slightly cold and 70% of users find the thermal sensation acceptable on their feet.
Limit temperature: felt very cold and 10% of users consider the thermal sensation acceptable on their feet.

Are my boots warm enough for winter hikes?

Your boots have a membrane to guarantee waterproofing and breathability. A membrane is a very fine component (5 to 25 micrometres) affixed to the inside of a fabric that prevents water from entering but allows moisture to escape.

How do my boots protect me from outdoor conditions?

- Allow to dry away from a heat source. 
- On dry leather, brush with a stiff brush (horsehair and brass fibres) to remove mud and dirt.
- Use a crepe brush or nubuck eraser to remove stains.
For stubborn stains, clean with a brush and a little warm water and leave to dry.
- Brush again with a stiff brush.
- Spray a waterproofing product. This will give a shine to the leather and brighten up the colour.

How to care for nubuck leather shoes

Thermal comfort is a balance between warmth and breathability. Too much heat or not enough breathability lets moisture accumulate and cold set in. Designed with your activities in mind, this membrane prevents water infiltration on one side and lets moisture escape on the other.

Breathable boots for optimal thermal comfort

We made sure that your boots are waterproof by conducting laboratory tests that simulate walking with the boots half-submerged in water. We also conducted field tests to measure wear and aging. We tested 3 levels of waterproofing: 2,000 flexes (approx. 4 km/2.5 mile walk), 4,000 flexes (approx. 8 km/5 mile walk) and 8,000 flexes (approx. 16 km/10 mile walk). This boot has been tested for up to 4,000 flexes, equivalent to an 8-km (5-mile) hike.

The boot’s traction depends on the number and shape of the lugs. The grip depends on the materials of the sole and the tread pattern, like car tires. Traction optimizes propulsion, prevents slipping when going uphill, and stabilizes the boot. 
Grip prevents the boot from slipping and skidding on smooth ground or in demanding conditions (rain, snow, and ice).

What is the difference between traction and grip?

The material and tread of Snow Contact soles are specifically designed for optimal grip and traction. Snow Contact soles are more effective on snow than traditional soles. When walking on ice, adding anti-slip crampons to your boots is the only way to ensure optimum safety.

What are the advantages of Snow Contact technology?

This product was lab-tested by our engineers to ensure your total satisfaction. We tested the following elements:  

Will my boots withstand regular use in the long term?

Boots can become heavy through condensation and perspiration if you wear them in wet conditions.
If your boots are very wet, remove the insole and fill the upper with balls of newspaper, changing them regularly. The paper will absorb the moisture and help them dry faster.
Never place your boots too close to a heat source. Leave them in a warm, dry, and ventilated place instead.

Overhand (walking stick style). Pole aligned with arm, without bending wrist

Ergonomic grip

Easy-to-use, reliable pushpin system (push button). 90/95/100/105/110 cm (35/37/39/43”)

Adjustable

3 telescopic sections. Collapsed length: 58 cm (23”). Collapsed width: ~12 x 5 cm (5 x 2”).

6061-T6 aluminum. Large tube diameter 20/18/16 mm (0.8/0.7/0.6”). Tungsten tip

Durability

Summer basket and tip provided. Accessories and after-sales parts available separately.

Compatibility

Weight

This pole has an innovative grip system for optimal safety and comfort during hikes.

Adjustable Walking Pole

Grip Type

Wrist Strap Type

Collapsed Length

Tip Type

Handle Covering Material

Number of Part(s)

Suspension

Walking Stick Type

handle length

shape of handles

With Wrist Strap

Designed and validated by our team.
This model uses the chassis of the A 200 Hiking Pole. It is equipped with the same pushpin adjustment system and oversized tubes.
Why do we offer an overhand grip? Standard grips do not suit everyone, particularly on long hikes. This pole is designed so that you don’t have to bend your wrist. Force is more evenly distributed across the arm when it is aligned with the pole.

Design

Hold your arm straight or slightly bent. Shorter than conventional poles.
Method: - pull the lower part until the pushpin locks (metal lower button) 
- slide the middle tube until the upper button reaches the desired hole
- use the lines printed on the tubes to align the pushpin with the holes
Never go past the Stop line or the pole could break.

How to adjust your poles to the correct length

This hiking pole is designed to help you balance, propel yourself forward, and reduce impact on your arms and legs.
For safety, make sure your pole is locked in place with a few firm taps, both before you leave and periodically during your hike. Do not attach it to your backpack, as this can be hazardous in the event of a storm.Some users are sensitive to the whistling noise that can occur when the wind sweeps through the adjustment holes.

Directions for use

Caring for your poles properly will help maintain optimal function and increases their lifespan.
If water has gotten into the pole, take it apart and allow it to dry. Clean away any dust and mud using a soft brush or paintbrush.
Once dry, reassemble the pole. Do not oil or grease any parts.

Care instructions

Decathlon sells hiking and trekking poles individually. This is because they are used in different ways. Some people prefer to use only one pole. If someone uses a pair and one pole breaks, they can replace one broken pole without having to buy a new pair.

Why is the pole sold individually?

Hiking Poles & Walking Poles

Comfort temperature between 5°C and 10°C.
Warm even when damp.

Conductive material on the thumb and index finger for touchscreen use.

Tactile efficiency

These liner gloves were designed to provide extra warmth when hiking.  They’re also touchscreen compatible.

quechua

Kids’ Warm and Waterproof Winter Parka, NH 900 Age 7–15