Stability

Compatible with bikes equipped with bottle cage screws.

Compatibility

Designed for carrying a water bottle on your bike.

Condition

Skill Level

Assembly Type

Position

Main Material

Bike Hydration

100% effective on all types of Butyl inner tubes.

Less restrictive and just as effective as a classic patch.

Ease of use

Easy assembly/dismantling

This self-adhesive patch kit lets you easily and quickly repair punctures so you can carry on enjoying your bike rides.

Tire Assembly

1. Remove the inner tube and locate the puncture
2. Roughen the area around the puncture using the sandpaper
3. Clean and dry this area
4. Apply the self-adhesive patch and press hard on the entire area for around 45 seconds
5. Run your nail over the patch to increase its adhesive power
6. Put the inner tube back in the tire and the tire in the rim
7. Inflate your tire to the recommended pressure.

User tip: 

Optimal lifespan: 3 years at room temperature (16-22°C, 30-70% humidity), away from direct light and in its original packaging.
Minimum temperature for repairs: +10°C 
Temperature for use: -40°C to +65°C

Storage:

Be careful not to touch the sticky part when positioning the patch, so as not to reduce its sticking power.
Remove any air bubbles by pushing from the centre of the patch towards the edges.
Rub the patch with your nail to warm it up and help it stick better.
Finally, press firmly with your thumb, covering the entire patch for 45 seconds to 1 minute (press on a clean, flat surface for greater effectiveness).

Applying the patch: 

A good sanding of the area concerned will give you a better result.
The aim is to obtain a flat, clean surface so the patch holds as well as possible.If the puncture is close to excess material, sand until the excess is removed.
Sanding will create micro-scratches that will allow the glue on your patch to set more easily.
This stage is very important for a lasting repair.

Sanding: 

Clean away any impurities to ensure a clean, flat, and dry area to apply the patch.
Remember: don't use water or any other product to clean your inner tube after sanding. It's essential to have a clean, dry surface to ensure that your patch lasts.

Cleaning: 

Rockrider

onlyonline

Volume: 0.6 L (1/10 gal). Can carry a spare inner tube, tire levers, patch kit, etc.

Capacity

Easily secures to 2 spots (saddle and seat post) with hook and loop bands.

Zip closure for easy access to your belongings, even when on the saddle.

Easy opening/closing

Exceptionally durable materials for a longer lifespan.

Robustness

Specifically positioned to accommodate a light.

Designed for carrying the essentials you need for bike repairs and a few small items.

Height (cm)

Volume (L)

Volume (ml)

Frequency

Weight (g)

reflective

Waterproof

Attachment Type

Style

This bag can typically hold:
- One 700 x 35-45 inner tube + 2 tire levers + 1 multi tool + repair kit with patches + spanner set + debit card
OR
- Two 700 x 25-35 inner tubes + 2 tire levers + 1 multi tool + two 16 g (1/2 oz.) C02 cartridges + inflation valve
OR
- One 27.5" x 1.9-2.5 + 2 tire levers + 1 multi tool + two 20 g (7/10 oz.) C02 cartridges + inflation valve
OR
- One 29" x 1.7-2.2 inner tube + 2 tire levers + 1 multi tool + two 20 g (7/10 oz.) C02 cartridges + inflation valve

This multitool was designed to let you make adjustments and/or repairs to your bike while out on a ride.This compact and light 6-in-1 multitool 100 won't slow you down while riding.4 Allen keys (3 / 4 / 5 / 6 mm [0.1, 0.15, 0.2, 0.25"]), 1 Phillips & 1 flat screwdriver

Includes 6-functions multitool

Pack of three yellow, simple, sturdy, light, and practical tire levers. Suitable for all types of tires.
Designed for removing all types of bike tires. The tip allows you to deflate the tire and its edges attach to the spokes for greater ease.PA66 polyamide material avoids breakage when bent.Tire lever that clips together for easy storage.

Includes 3 tire levers

Bike Bags & Backpacks

clearance

with 700 diameter tires, 23 to 32 mm cross-section. ETRTO 23/32 – 622

Optimized composition to guarantee your inner tube has a good seal.

Designed for replacing the inner tube of your 700 diameter, 23 to 32 section tires with a 48 mm (2") Presta valve.

Valve Type

Wheel Size

Self-Repair

Section

Etrto

Check all the information indicated on the sidewall of the tire (diameter and width). For example, 27.5 x 1.90 means a tire with a 27.5" diameter that is 1.90" wide.
The dimensions in mm are also on the tire sidewall.
For example, 50-584 means your tire is 50 mm wide with an inner diameter of 584 mm (approx. 27.5 x 2.00).

How to choose your inner tube

Remove the old inner tube using a tire lever.

Removing an inner tube

Check the condition of your tire and replace it if necessary. 
Make sure no objects are lodged in the tire.
Check the condition and position of your rim strip.
A rim strip that’s even slightly bent can cause punctures.
Check that your rim doesn’t have any other issues that could damage your inner tube.

Checks to carry out before installing an inner tube

Watch our video before you start.
Pre-inflate the inner tube slightly to avoid pinching.
Make sure you’re using the correct valve for your rim and then insert it.
Put the entire inner tube inside the tire so that it fits inside the rim.
Take care not to pinch the inner tube when installing it.

Installing the inner tube

Start installing the tire at the valve.
Finish installing the tire across from the valve to avoid pinching the inner tube.
Never install your tire with a tool or a tire lever, as you risk pinching or puncturing the inner tube.

Installing the tire

Carefully inflate your tire to the pressure recommended by the manufacturer (visible on the tire sidewall in PSI or bars: 1 bar = 14.51 PSI).
Regularly check that your tire is in the correct position as you inflate it.

Inflating the tire

To avoid punctures from pinching and for the best tire performance, we recommend checking your tires and inflating them to the suggested pressure before every ride.

Our professional advice

Weight:

Bike Tubes & Valves

Limits taste and odour

100% waterproof with the mouthpiece closed, non-drip with mouthpiece open.

Ergonomic shape and soft material make it easy to drink as you ride.

Ergonomic grip

Comfortable mouthpiece made of soft elastomer.

Mouth comfort

Clear body graduated for easier intake monitoring.

Precision

The elastomer cap won’t slip off and makes closing the bottle easy.

Traction

Compatible with all bottle cages on the market.

Developed for demanding cyclists who want a bottle that keeps them hydrated as they ride.

isothermal

Cap Type

All of our "FastFlow" bottles use the SureSnap® valve, the best on the market. This valve controls the flow of water effectively and precisely. When you press down, water squirts out of the mouthpiece.
Plus, the anti-leak mouthpiece can stay open while riding without water dripping onto your bike's frame.

SureSnap® valve

The mouthpiece is 100% watertight in closed position. Use this position for mixing the isotonic drink in the bottle or for carrying it in a bag.
Once on your bike, leave it open. The SureSnap® valve prevent leaks. Drink quickly and safely!

How to use the FastFlow valve

There’s nothing worse than a plasticky taste or smell in a water bottle. But this is the case for most cycling water bottles. 
We tested numerous plastics before finding just the right one, which is supple and has a neutral taste and smell. When blind tested against bottles from other leading brands, ours were the most neutral-tasting.

No more plasticky smell or taste.

Clean the water bottle thoroughly after each use. If you use isotonic drinks, rinse all parts of the bottle, cap, and mouthpiece to make sure there is no liquid remaining inside. Use liquid detergent and a long brush to clean the bottom of the bottle. 
Dry well and store with the cap off. Otherwise, mould could develop in the bottle.
Do not put in the dishwasher (particularly above 70°C).

How to care for your water bottle

Notch to hold the tire lever on the spokes, perfect grip on tire, deflation tip.

Tire lever that clips together for easy storage.

Compact design

Designed for removing your bike tire. The tip allows you to deflate the tire, while its edges attach to the spokes for greater ease.

PA66 polyamide material avoids breakage when bent.

Tyre lever features: 

Bike Tools

Anatomical chamois pad with high-density foam perfectly moulds to your body.

Sitting comfort

Wide elastic and silicone strips at the thighs.

Quick drying thanks to active sweat-wicking fabric.

Moisture management

Super handy pocket on the outside of the thigh for easy access while riding.

Pockets

The Endurance bib shorts were designed for optimal comfort and support when riding up to 3 hours at a moderate pace.

Maximum washing temperature 30°C. Normal cycle.

Intensity

Season

reinforced area

Number of Pockets

retaining strip

belt height

Weather Conditions

Reversible

Stitching Type

Pocket

Type of Length

Zipper Type

With Straps

The Endurance collection is for all cyclists looking for comfort, no matter the distance. 

Our designers and engineers pay particular attention to your comfort on the bike at every step of the design process. 
Our aim: make you (almost) forget what you’re wearing and simply enjoy the pleasures of road cycling.

The Van Rysel Endurance range

The Endurance collection comprises three signatures:

• Discover: simple, effective products, suitable for beginner cyclists

• Endurance: main collection for experienced cyclists looking for comfort for their cycle outings.

• Endurance Ultra outfits specially designed for long-distance and touring cyclists.

Signatures in the Endurance range

We’ve reworked these shorts to bring you a high-quality product with a focus on comfort for cycle outings of 3 to 5 hours. These shorts have the following features:
- silicone elastics around the thighs for excellent hold when pedalling
- a fit that is close without compression, so you can forget you're wearing it
- two easily accessible side pockets

How our Endurance cycling shorts were designed

The Endurance bib shorts come with a new anatomical chamois pad. 
The central seam lets the pad fold. This construction technology ensures a perfect fit and stability in the saddle.

Developed for men’s bodies, it is made of stretch layers that follow your body’s movement when pedalling.

Anatomic Endurance pad

This chamois pad is made from a unique combination of materials that offer the protection you need on your long rides. Both in the ischial and perineal areas. It has a protective, high-density, 120 kg/m³ foam insert. The top layer of fabric, which is in direct contact with the skin, is made from spandex and brushed polyester threads to prevent rubbing and irritation. 
All layers are extremely breathable.

Breathable, high-density foam

Men's Sports Shorts

Enables you to carry out standard bike adjustments and repairs.

Versatility

Weight

This multitool was designed to let you make adjustments and/or repairs to your bike while out on a ride.

Number of Functions

Allen keys: 2, 2.5, 3, 4, 5, 6, 8 mm [5/64", 3/32", 7/64", 5/32", 3/16", 7/32", 5/16"].
T25 Torx keys.
PH2 Phillips screwdriver.
8, 9, and 10 chain tool with storage handle.
Spoke wrench: 3.2 mm (0.127") / 3.3 mm (0.130") / 3.5 mm (0.136").

Composition: 

75 dB. Aluminum dome creates a clear, powerful sound.

Audio efficiency

Only compatible with 22.2 mm (9/10") handlebars (one of the most widely used)

This bell ensures your safety when riding in a less noisy environment.

Assemble With Tools But Without Tools Provided

Bike's Bells

Install your bike easily and effortlessly.

Its points of contact and the sliding handle make your bike more stable.

Adjustable hooks make it easier to put your bike on the seat stay.

Flexibility

Your bike stays in place whatever the tyre width (23-100)

This bike rack is also designed to help you maintain your bike easily with its double use: storage rack and mini workshop stand.

Maximum Bike Weight

Maximum Load

Attachment

Number of Bicycles

Product weight: 2.5 kg
Package dimensions: 58 x 39 x 18 cm
Product dimensions: 45/40 cm on the floor
Product height: 75 cm
Maximum space for wheel: 100 cm

Features

Number of bikes

This bike rack is compatible with all types of bike, from 16 to 29" (including electric bikes)

For which type of bike?

PVC on the hooks that protect the frame.
Dual-use rack.

Key benefit

Storing your bikes properly will extend their lifespan by protecting them from impacts, scratches and wear from bad storage. Optimised storage frees up space, creating a more organised and practical environment. A well-stowed bike is always ready to use..

Why should you I store my bikes properly? 

Sliding the slider along the support tubes helps to keep the bike in place for better stability. It applies pressure to the tyre, instead of the frame, preventing any direct contact between the frame and the rack. With the slider, the rack can be adjusted to different sizes of bike.

Slider

Warranty

Bike Racks & Stands

Home trainer tire designed to resist against roller wear.

Abrasion resistance

Developped for home trainer use, the B'Twin Home Trainer tire will improve performance during your sessions.

tire width x wheel size

Tire Bead

Type of Tyre

tire compound type

e-bike ready

Width (mm)

Bike Tires

700x35 to 700x45 tires (28"). 48-mm valve.
ETRTO 35/45 – 622

Compatible with 700 diameter tires, with a cross-section ranging from 35 to 45 and a 48-mm Presta valve.

Check the sidewall for tire information (diameter and width). For example, 27.5 x 1.90 means a tire with a 27.5” diameter that is 1.90” wide.
The dimensions in mm (ETRTO international unit) are also on the tire sidewall.
For example 50-584 means the tire is 50 mm wide with an inner diameter of 584 mm (or 27.5 x 1.90).

Remove the old inner tube using Btwin tire levers.

Check the condition of your tire and replace it if necessary. 
Make sure no objects are lodged in the tire.
Check the condition of your tire rim strip.
A rim strip that’s even slightly bent can cause punctures.
Check that your rim doesn’t have any other issues that could damage your inner tube.

Pro tip

Compatible with all 6-hole hydro-mechanical systems

Designed to replace your TR-52 160 mm 6-bolt disc brake rotor. Sold with 6 bolts. 

Brake Type

Diameter (mm)

Diameter: 160 mm 
Attachment: 6 holes
Material: Steel
Screw tightening torque: 4–6 nm

Technical features

The manufacturer recommends using this rotor with brakes from the same brand.
Tighten to the torque specified for your hub 
and apply thread-locking fluid each time you re-fit the rotor.

Assembly instructions

Avoid spraying greasy products on the rotor, as they can reduce braking power.
Replace the rotor whenever you change the brake pads.

Sports/

Cycling/

Bike Accessories/

Bike Pumps/

rockrider

Road Bike Hand Pump