Rigid Front/Rear Mudguard All Mountain Bike for 26" - 27.5" - 29" V3

This 26" to 29" front and rear mudguard set is very easy to mount and remove.Clipped onto screw fasteners, it provides a perfect fit for your mountain biking outings!

ID 8913864

Checkout as a member and get more time to return products in case you change your mind.
QUEBEC CONSUMERS ONLY: Decathlon Canada Inc. offers a wide selection of repair services, spare parts (in-store and online), and support information, but we do not guarantee their availability under the Consumer Protection Act. The only exceptions are the specific repair services listed below for purchases made on or after October 5, 2025
See more

How to get it

Rigid Front/Rear Mudguard All Mountain Bike for 26" - 27.5" - 29" V3 1/12

Rigid Front/Rear Mudguard All Mountain Bike for 26" - 27.5" - 29" V3 2/12

Rigid Front/Rear Mudguard All Mountain Bike for 26" - 27.5" - 29" V3 3/12

Rigid Front/Rear Mudguard All Mountain Bike for 26" - 27.5" - 29" V3 4/12

Rigid Front/Rear Mudguard All Mountain Bike for 26" - 27.5" - 29" V3 5/12

Rigid Front/Rear Mudguard All Mountain Bike for 26" - 27.5" - 29" V3 6/12

Rigid Front/Rear Mudguard All Mountain Bike for 26" - 27.5" - 29" V3 7/12

Rigid Front/Rear Mudguard All Mountain Bike for 26" - 27.5" - 29" V3 8/12

Rigid Front/Rear Mudguard All Mountain Bike for 26" - 27.5" - 29" V3 9/12

Rigid Front/Rear Mudguard All Mountain Bike for 26" - 27.5" - 29" V3 10/12

Rigid Front/Rear Mudguard All Mountain Bike for 26" - 27.5" - 29" V3 11/12

Rigid Front/Rear Mudguard All Mountain Bike for 26" - 27.5" - 29" V3 12/12

Non-messy
This kit effectively protects your lower back, chest, and face from muddy spray.
Compatibility
This kit fits 26" to 29" mountain bikes with a telescopic fork.
Weight
Front weight: 120 g (4 oz.) Rear weight: 230 g (8 oz.) Total: 350 g (12 oz.)
Easy assembly/dismantling
Fits to its screwed-on bracket in just one click and keeps its position setting.
Robustness
The rear features a "fuse" arm (that unclips) in case of high impacts.

Description

Design details

Level of protection
This wide, shock-resistant mudguard kit stops mud from getting sprayed onto the rider's lower back, chest, and face. To do this, place the rear mudguard as close as possible (2 to 3 cm [1 to 1 1/2"]) to the wheel. You can't avoid muddy splatters completely when it's damp... But for getting from A to B, we recommend using a hybrid bike mudguard kit (with longer blades that are closer to the wheels), if compatible with your bike frame, and tire width.
Bike compatibility
This kit is suitable for 26" to 29" mountain bikes, with a tire width up to 2.8" in 27.5" and 2.6" in 29", equipped with a telescopic fork. To ensure a good fit at the front, the internal diameter of the steerer tube must be between 18 and 34 mm (7/10 and 1 1/3"). To ensure a good fit at the rear, the diameter of the seat post must be between 25.4 and 34.9 mm (1 and 1 1/3").
Box contents
The front mudguard comes with 2 expanders allowing it to be mounted on steerer tubes with a diameter between 19.2 and 24.2 mm (3/4 and 1"), & 29 and 35 mm (1 and 1 2/5"). The rear fender comes fully assembled and ready to be mounted, no matter the diameter of your seat post.
A modern, efficient design
With dimensions that fit all the new wheel and tire sizes on the market, and with a bold design, our mudguard kit gives your bike a modern, sporty look. Everything has been designed to give you the best experience: - A reliable screw-on bracket that holds the fenders in the same position each time - An easy system to clip the blade onto and take it off your bike depending on the weather - Compatible with accessories (camera, lights)
Compatible accessories
In dry weather, you can unclip the blade from the rear bracket and clip a sports camera on instead. 'GoPro’ clip system. For your safety on trips early in the morning or late at night.A rail is provided at the end of the rear mudguard blade to accommodate a CL 100, CL 500, CL 900, ST 500, or RL 510 type red rear light.
Dimensions and weight
Front: Blade length: 553 mm (22") Blade width: 73 to 97 mm (3 to 4") Total weight: 120 g (4 oz.) Rear: Blade length: 497 mm (20") Blade width: 73 to 95 mm (3 to 4") Total weight: 230 g (8 oz.)

Raw material	75%
Manufacturing	0%
Packaging	10%
Distribution	6%
Use	0%
End of life	9%

Raw material	75%
Manufacturing	0%
Packaging	10%
Distribution	6%
Use	0%
End of life	9%

Rigid Front/Rear Mudguard All Mountain Bike for 26" - 27.5" - 29" V3

How to get it

Features

Description

Design details

Specifications

Details

Composition

EU product safety contact

Usage & care

Environmental impact

Carbon footprint

Description

Design details

Specifications

Details

Composition

EU product safety contact

Specifications

Details

Composition

EU product safety contact

Usage & care

How to use

Everything you need to know

How to repair or replace

2-year warranty

Care instructions

Usage precautions

Environmental impact

Carbon footprint

Specifications

Details

Composition

EU product safety contact

How to use

Everything you need to know

How to repair or replace

2-year warranty

Care instructions

Usage precautions