To inflate your SUP, check that the valve is in the raised position (closed), so that air does not escape.
Connect the pump.
Inflate to 17 PSI.
The more inflated the SUP, the more stable it is and the better its movement.
Disconnect the pump and close the outer plug.
To deflate your SUP, push the valve in firmly, the air will escape.
Roll, starting from the opposite side to the valve to remove all the air for tight folding.
Fin and fin base
Available through customer service and online in the event of breakage or loss.
SUP fin reference: 8403374 Remember to remove the fin once you are out of the water.
If possible, rinse the fin base before and after use.
Start folding up from the fin base, following the dotted lines to avoid damaging the base
Recommended user weight
For optimal use of the product, the maximum recommended weight is 140 kg.
The maximum load of the stand-up paddle board is 320 kg.
NEVER UNSCREW THE VALVE WHEN THE SUP IS INFLATED! RISK OF INJURY.
If the valve leaks, once the SUP is deflated, close it a quarter turn using the tool provided.
If necessary, it is possible to change the valve, please consult the workshop of your Decathlon store.
BAG CONTAINING THE FOLDED SUP:
Height: 90 cm
Width: 46 cm
Thickness: 24 cm
In the event of a hole in the structure, it is possible to repair the SUP with the cuttable repair patches and a high-pressure resistant MEK glue.
We have a stand-up paddle board repair kit, reference 8512384.
Valve tightening tool (use only with the SUP deflated)
Recommendations for use
We recommend that you wear a buoyancy aid (reference 8387600) or a buoyancy belt (reference 8600104)