Designed for users up to 80 kg.
Maximum load: 245 kg

Stability

Glides better than 8- or 9-ft boards, but not as well as 10.5-ft boards

Glide performance

Light and compact, it can be folded easily and carried in its bag.

Easy transport

If you’re into stand-up paddleboarding, this set is perfect for a group summer experience. Great for holidays and calm waters!

Volume (L)

thickness (in inch)

Condition

Skill Level

Board Length (ft)

Maximum Load

Board Type

Power Assisted

Practice Conditions

sold in pack

Number of Users

Board Width (in)

User’s Maximum Weight

Inflated board:
Length: 9.5 ft (290 cm)
Width: 33” (84 cm)
Thickness: 4.75” (12 cm)
Volume: 245 litres
Weight board only: 6.7 kg (+/- 10%)
Weight board, leash, fin & backpack: 8.9 kg (+/- 10%)
Weight of the paddle included: 1100 g (+/- 10%)
Pump weight included: 1200g (+/- 10%)

BAG CONTAINING FOLDED SUP:
Height: 94 cm (15.8")
Width: 42 cm
Thickness: 24 cm

These dimensions leave space for the pump and paddle

Technical dimensions

Designed for riders up to 80 kg without compromising paddling quality.
Recommended user weight:
Under 60 kg: very stable board
Under 80 kg: ideal board for an easy introduction to stand-up paddleboarding
Over 80 kg: relatively unstable board for beginners

Maximum load for buoyancy: 245 kg

What is the recommended user weight and maximum load of the board?

Inflating:
Make sure the orange valve pin is in the upright position.
Connect the pump.
Inflate to 15 psi. 
The more you inflate the SUP, the more stable it will be. Disconnect
the pump and replace the valve cap.

Deflation:
Push down on the valve pin to let the air out.
Do not put your face near, and stay back.
Remove all air by rolling up from the side opposite the valve.

How do you inflate and deflate a stand-up paddleboard?

Never leave your board out of the water in direct sunlight.
If you have to leave your board in the sun, we recommend keeping it away from any sources of heat (walls, floors, car roofs, etc.) and reducing the pressure to 10 psi in order to prevent overpressure and irreversible damage (explosion, delamination, leaks, etc.).

How should I store my board and where to leave it to dry?

Fins and fin bases are available from our after-sales service and website
SUP fin reference: 8363793.

Always remove the fin once you’re on shore.
If possible, rinse the fin base before and after use.

Fold up from the fin base, following the dotted lines to avoid damage.

Fin and fin base

We have a stand-up paddleboard repair kit under the reference 8512384 for repairing small, easily visible leaks.
For all other repairs, we recommend that you contact the workshop of your local shore.
Fins, handles, valves, and significant leaks can all be repaired.

How can I repair my stand-up paddleboard?

9.5-feet SUP
Adjustable split paddle
High-pressure manual pump
Standard fin
Backpack
Leash
User guide
Repair patch (glue not included)
Valve tightening tool

What’s in the set?

Never unscrew the valve to deflate your SUP (may cause injury).
If the valve leaks, deflate your SUP and tighten it a quarter turn using the valve wrench.

If you need to replace the valve, please contact the workshop at your nearest Decathlon store.

What do I do with the tightening tool in the SUP bag?

Single-layer dropstitch without stringer. Double-layer side strips with dual assembly technology: 1st strip welded, 2nd strip glued.

What kind of construction?

We recommend:
Always wear a buoyancy aid or a PFD belt.
Do not go beyond 300 metres from shelter.
Do not use the leash on rivers.
Notify someone of your trip and location.
Make sure to familiarize yourself with any local navigation rules in the area.

Sports/

Water Sports/

Paddleboarding/

Inflatable Paddle Boards/

itiwit

9.5-ft Inflatable Stand-Up Paddle Set for 1 person, 100