Fog-free goggles, each application guarantees 1-2 hrs of swimming without fog.

Anti-fogging

This marker was developed to reactivate the anti-fogging treatment for goggles and to prolong their lifetime.

Skill Level

Type of Lens

1) Apply to your lenses (ensure they are completely dry)
2) Leave to dry for at least 1 minute
3) Immerse the goggles in water to spread the product 

Re-apply on average every 1 to 3 sessions, depending on the frequency at which fog reappears. 400 applications on average.
If goggles fog up, dip them in the water again, a protective film will reform to allow swimming in good conditions.

How to use

Do not use on new goggles, the new anti-fog treatment can be damaged or can scratch the lenses.
Never touch the inside of the lenses - Do not rub them.
If goggles are rubbed before applying the product, the product may not work properly.
The goggles must be dry before applying the product
Replace the marker's cap after use
Do not use with contact lenses
Must not be used by kids

Precautions

When used according to instructions, this product does not pose a health risk to users. Tests were conducted through an independent laboratory, followed by usage tests with a panel of swimmers to guarantee product compliance.

Read instructions carefully before using the product

Safety

Water: 70%-80%
Propylene glycol butyl ether: 1%-10%
2-(2-butoxyethoxy) ethanol: 1%-10%
Fluorocaliphatic oxyethylene: 1%-10%
Potassium Hydroxide: 0%-0.5%
Magnesium lauryl sulfate: 0 - 0,5%

Sports/

Water Sports/

Snorkeling Gear/

Diving & Snorkeling Masks/

nabaiji

Anti-fog Re-activator for Swimming Goggles and Swimming Pool Masks